Appelez-nous au 1-888-826-6342
204°C Max Constant Wattage Heating Cable 120-480 Vac
Medium Temperature Constant Wattage Heating Cable (Price Per Foot)
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$11.33 |
| 5-9 | C$10.76 |
| 10-24 | C$10.54 |
| 25-49 | C$10.08 |
| 50-99 | C$9.86 |
| 100+ | C$9.63 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Continuous Exposure Rating up to 400°F
- Low Watt Density
- Parallel Resistance Heater
- Cut-to- Length at the Job Site
FE12-120B Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Supply Voltage
Power Density
Maximum Temperature Exposure
Wire Gauge
Approx. Cable Size
Insulation Material
Minimum Purchase Length
The FE cable heating element is tension wrapped and covered with a fluorocarbon film and enclosed in a minimum 20 mil FEP abrasion resistant extruded jacket. This tough outer cover provides moisture and dielectric protection as well as resistance to abrasion.
A tinned copper overbraid provides additional protection and electrical ground return path.
APPLICATIONS
OMEGALUX™ FE cable is a low Watt density electrical resistance heater. It is designed for freeze protection and midrange process temperature control and maintenance applications in lines periodically purged with 150 PSIG steam.
# Cable circuit module length in feet. When ordering please allow a minimum of 1 module length extra for terminations.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F.
To complete your system the following accessories are recommended: (1) Termination kits for FE cable (see page B-31 for specifications), (2) Control options - see Section P for complete selection of controllers thermostats.
A tinned copper overbraid provides additional protection and electrical ground return path.
APPLICATIONS
OMEGALUX™ FE cable is a low Watt density electrical resistance heater. It is designed for freeze protection and midrange process temperature control and maintenance applications in lines periodically purged with 150 PSIG steam.
| Model No. | Watts/ft. | Volts | Module# Length (ft)1 | Max** Length (ft) |
| FE3-120B | 3 | 120 | 2 | 360 |
| FE3-240B | 3 | 240 | 4 | 720 |
| FE5-120B | 5 | 120 | 2 | 275 |
| FE5-240B | 5 | 240 | 3 | 550 |
| FE8-120B | 8 | 120 | 2 | 220 |
| FE8-208B | 8 | 208 | 4 | 381 |
| FE8-240B | 8 | 240 | 4 | 440 |
| FE8-277B | 8 | 277 | 4 | 508 |
| FE8-480B | 8 | 480 | 6 | 880 |
| FE12-120B | 12 | 120 | 2 | 180 |
| FE12-208B | 12 | 208 | 4 | 312 |
| FE12-240B | 12 | 240 | 2 | 360 |
| FE12-277B | 12 | 277 | 4 | 416 |
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F.
To complete your system the following accessories are recommended: (1) Termination kits for FE cable (see page B-31 for specifications), (2) Control options - see Section P for complete selection of controllers thermostats.
We purchased 8’ of fe8-480b and only need 2’. Can it be cut? It didn’t come with ends. What should we order for that? It’s self regulating so do we need a temperature control?
The FE-UC-KIT is sold for terminating the cable which can be cut. It is self regulating so a Controller is not required though some type of over temperature device to detect and open the circuit if an excessive temperature is reached is advised.
Date published: 2020-08-20