Appelez-nous au 1-888-826-6342
Flow/No Flow Single Sensor Controller With Strobe Alert
Flow Alert Single Sensor Controller
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Calls Immediate Attention to Alarm Conditions
- High Intensity Strobe Light Reduces Operator Error
- Adjustable Time Delay Relay
- Controls Pumps, Valves and Alarms
FLCN-101 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Connection Size
Body Material
Switch Type
OMEGA’s flow alert calls attention to alarm conditions. For operator alert to low flow conditions, the flow alert offers an excellent solution to this problem. An amber lens distributes the high intensity strobe light in a pattern which calls immediate attention to alarm conditions. The visual alert combined with a controller makes it both cost effective and easy to install.
SPECIFICATIONS
Voltage Input: Selectable, 120 or 240 Vac, 50 to 60 Hz
Max Consumption: 5 watts
Lighting Element: High intensity lamp
Brightness: Greater than 50,000 CP
Relay Output: Isolated and sealed single pole double throw (SPDT) relay, Form C
Switching Mode: Selectable, NO or NC states
Max. Relay Switching Voltage: 120 Vdc or 240 Vac
Max. Switched Current: 10 amps
Time Delay: Adjustable from 0.15 to 60 seconds
Strobe Type: Xenotube
Strobe Flash: 1 per second
Max. Temp. Rating: 70°C (158°F)
Sensor Voltage Supply: 13.5 Vdc @100 mA
Mounting Connection: 3/4 NPT
Conduit Connection: 1/2 NPT
Enclosure Rating: NEMA-4X (IP65)
Enclosure Material: Polypropylene (PP), flame retardant
Dimensions: 7.1 D x 16.2 cm H (2.8 x 6.4') x 3/4 NPT
SPECIFICATIONS
Voltage Input: Selectable, 120 or 240 Vac, 50 to 60 Hz
Max Consumption: 5 watts
Lighting Element: High intensity lamp
Brightness: Greater than 50,000 CP
Relay Output: Isolated and sealed single pole double throw (SPDT) relay, Form C
Switching Mode: Selectable, NO or NC states
Max. Relay Switching Voltage: 120 Vdc or 240 Vac
Max. Switched Current: 10 amps
Time Delay: Adjustable from 0.15 to 60 seconds
Strobe Type: Xenotube
Strobe Flash: 1 per second
Max. Temp. Rating: 70°C (158°F)
Sensor Voltage Supply: 13.5 Vdc @100 mA
Mounting Connection: 3/4 NPT
Conduit Connection: 1/2 NPT
Enclosure Rating: NEMA-4X (IP65)
Enclosure Material: Polypropylene (PP), flame retardant
Dimensions: 7.1 D x 16.2 cm H (2.8 x 6.4') x 3/4 NPT
