Configurable thermocouple probes with lead wire. Miniature transition joint from probe to cable is molded (260°C max). Probe diameters range from .010" to .125".
Thermocouple probes that can be cut to the desired length with a standard tube cutter to fit field applications. Plastic plug in tube end protects the wires from sharp edges.
Configurable thermistor probes for immersion applications with 316 SS sheath, strain relief spring and PFA extension cable. Available with selection of resistances and sizes.
RTD probes that can be cut to the desired length with a standard tube cutter to fit field applications. Plastic plug in tube end protects the wires from sharp edges.
Thermistor probe has a 1/8" NPT mounting thread and audio connector. Comes with a mating connector and extension cable. Several resistance & accuracy options available.
RTD probes with 1/8" NPT brass compression or bayonet fittings and armored cable. Commonly used in extruder & molding equipment. Both straight and bend options available.
Class A, pt100 RTD probes have a copper tip that provides enhanced temperature response. Available in 2, 3, or 4 wire configurations and various sizes.
Immersion probe with bracket for easy mounting. Often used in appliance & lab temp applications up to 500°C. Great for air, gas, or liquid measurement.
Spring-loaded quick-connect bayonet style RTD probes with armored cable. Commonly used in extruder & molding equipment. Both Straight and bend options available.
Class B, pt100 RTD probes have a copper tip that provides enhanced temperature response. Available in 2, 3, or 4 wire configurations and various sizes.
Thermocouple probe has a section of coiled 304 SS cable that allows the probe to extend and retract as needed for use in steam washdown and other applications.
Probes with Hastelloy Tips for use at the high pressures and temperatures found in plastic extruders. Available in single and dual element options with 1/2"-20 NF Threads.
Sensor has a flanged housing and small diameter probe to allow easy mounting into ducts and flow systems. Low thermal mass for rapid response to temperature changes.
Used when the probe is installed some distance from the logger, controller, or other data acquisition device. Available in a variety of lead wire types with stripped leads or connectors attached.