Thermocouple sensors great for installing into pipes or limited space applications. 1/8" or 1/4" NPT mounting threads available with 72" of Stainless Steel overbraid cable.
Configurable thermocouple probes with lead wire. Molded transition joint from probe to cable is miniature (260°C max). Probe diameters range from .010" to .125".
Thermocouple probe assemblies with exotic sheath materials for extreme temperature applications up to 2315°C & lead wires. Available in type R, S, B, C, and D calibrations.
Spring-loaded quick-connect bayonet style thermocouple probes with armored cable. Commonly used in extruder & molding equipment. Both Straight and bend options available.
The high temp version of our spring-loaded quick-connect bayonet style thermocouple probes with armored cable. Commonly used in extruder & molding equipment.
Metal sheathed, mineral insulated thermocouple probes with completed sensing end and bare lead wires. Typically used as a component of a larger assembly.
Probes with Stainless Steel Tips for use under the high pressures and temps found in plastic extruders. Available in single & dual element options with 1/2"-20 NF threads.
Thermocouple probes with a metal transition between the sensor & cable. Cable is Nextel Insulated and is rated up to 815°C with Inconel Overbraid to protect it from damage.
Configurable thermocouple probes with fiberglass insulated cable that is rated to 482°C. Available with Stainless Steel, Inconel, and Omegaclad XL sheaths.
Thermocouple probes have a metal transition between the sensor & cable. Cable has a Stainless Steel Overbraid to protect it from damage and a miniature connector attached.
Thermocouple probes with 1/16" OD & a .020" diameter reduced tip for enhanced response to temperature change. Metal transition joint with PFA insulated cable & mini connector.
Thermocouple probe has a metal transition between the sensor & extension cable. Cable has BX armor over it to protect from damage and a standard size connector attached.
Thermocouple probes with lead wire. Sheaths made with Omegaclad XL material. These probes have superior long-term stability and low drift at high temperatures.
Thermocouple probes made with Omegaclad XL sheath material and extension cable. These probes have superior long-term stability and low drift at high temperatures.
Small diameter (0.062" or less) thermocouple probes with a compact transition joint between the probe and PFA or Fiberglass extension cable. Use where space is limited.
Configurable thermocouple probes with a high temperature low-profile molded plastic transition junction. Available in various calibrations, diameters, and lengths.
Used when the probe is installed some distance from the logger, controller, or other data acquisition device. Available in a variety of lead wire types with stripped leads or connectors attached.