Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 
Canada1-888-826-6342
International514-856-6928

Your One-Stop Source for Process Measurement & Control!

4-1/2 Digit DC Voltmeter, 1/16 DIN Case, 5 Vdc Powered

DP3520

4-1/2 Digit DC Voltmeter, 1/16 DIN Case, 5 Vdc Powered | DP3520

4-1/2 Digit DC Voltmeter, 1/16 DIN Case, 5 Vdc Powered

CAD238.00 DP3520-5

1 year warranty CE
  • ±19,999 Count Display Span
  • ±2 V to ±200 Vdc Ranges
  • True-Differential Input
  • 86 dB CMR
  • 1 GΩ Input Impedance
  • 1 pA Input Bias Current
  • 3-Wire Ratio Measurement
  • Serial BCD Output
  • Bright, 14 mm (0.56")
  • LED Display
  • Automatic Zero and Polarity
  • Display Hold and Test
  • 5 Vdc Power
  • Low-Profile 1⁄16 DIN Case
Process Measurement and Control Instruments - View related products

Description

The DP3520 is an economical 5-volt powered, high-resolution, high-accuracy 4-1/2 digit DC voltmeter in a compact 1/16 DIN case. The height of the panel cutout is only 22 mm (0.88"). The depth behind the panel is only 72 mm (2.83").

Low cost, small size, low power consumption and exceptional power-supply noise rejection make the DP3520 ideal for demanding OEM and portableinstrument applications. Non-isolated character-serial BCD output is standard to allow the DP3520 to be interfaced to other instrumentation.

PARALLEL BCD OPTION F2M
The F2M option is an upper board which converts the meter’s serial BCD output to non-isolated, three-state parallel BCD. An address decoder on the board permits the meter’s parallel BCD outputs to be enabled by a 4-bit binary address signal for three-state data-busing applications.

Options:
  • Three-State Parallel BCD Output
  • High-Impedance 3-Wire Ratio Input


SPECIFICATIONS
Noise Rejection
NMR: 60 dB at 50/60 Hz
CMR: 86 dB, DC to 60 Hz
CMV: SIG LO to DIG GND ±1 Vp
Accuracy at 25°C
Maximum Error: ±0.01% of reading ±2 counts
Span Tempco, Standard: (2 V) ±0.005% of reading/°C, (20/200 V) ±0.0025 of reading/°C
Span Tempco, Optional -LT discontinued: (2 V) ±0.001% of reading/°C, (20/200 V) ±0.002% of reading/°C
Step Response: 2 s
Warmup to Rated Accuracy: 0.5 hr
Signal Input
Configuration: Bipolar, true-differential
Zero: Automatic
Analog-To-Digital Conversion
Technique: Dual-slope, average-value
Polarity: Automatic
Signal Integration Period: 100 ms
Read Rate: 2.5/s
3-Wire Ratio Reference
Reference Voltage: 0.5 to 3.0V
Load on Reference, Std: 40 kΩ
Load on Reference, Opt: 1 GΩ
Display
Type: 7-segment, red LED
Height: 14 mm (0.56")
Symbols: -1.8.8.8.8
Decimal Points: Four positions programmable internally or at connector
Overrange Indication: Display flashes
Digital Signals
Output Signals: TTL-compatible
Hold Input: TTL or 5V CMOS compatible
Blanking Input: Open-collector compatible
Power
Voltage: 5 Vdc ±5%
Current: 170 to 230 mA
Power Consumption: 1 W (nominal)
Environmental Operating Temperature: 0 to 55°C
Storage Temperature: -40 to 85°C
Relative Humidity: 95% at 40°C(non-condensing)
Mechanical
Dimensions: 24 H x 96 W x 72 mm D (0.94 x 3.77 x 2.82")
Panel Cutout: 22.2 x 92 mm (0.874 x 3.622")
Weight: 5 oz (145 g)
Case Material: 94V-0 UL-rated polycarbonate
Place Order(Specify Model Number)
Part Number/Desc.
Availability
Price
Description
Qty
DP3520-3
Star
Availability: 1 week  
CAD238.00   
4-1/2 digit, 5 Vdc powered voltmeter, ±1.9999 Vdc
 
DP3520-4
Star
Availability: 1 week  
CAD238.00   
4-1/2 digit, 5 Vdc powered voltmeter, ±19.999 Vdc
 
DP3520-5
Star
Availability: 1 week  
CAD238.00   
4-1/2 digit, 5 Vdc powered voltmeter, ±199.99 Vdc
 
All dollar amounts on this site are shown in Canadian currency. Ordering Example: (1) DP3520-4 for 4-1/2 digit dc voltmeter, 5 Vdc powered, ±19.999 Vdc input, serial BCD output., CAD238.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Model select from:
DP3520 for 4-1/2 digit 5 Vdc powered voltmeter

(2) Input Range select from:
-3 for ±1.9999 Vdc
-4 for ±19.999 Vdc
-5 for ±199.99 Vdc

(3) Span Tempco (Temperature Coefficient) select from:
Nothing(leave field blank) for Standard (±0.005% of reading/°C) span tempco

(4) Upper Board Output Options select from:
Nothing(leave field blank) for Standard serial BCD output non-isolated
-F2M for Parallel BCD output three-state (mutually exclusive with PA) Includes PCB edge connector

(5) Case Mounting select from:
Nothing(leave field blank) for spring clamp case mounting
-UC for U-shaped mounting clamp

(6) Add-On Option select from:
Nothing(leave field blank) for red LED display
-G for Green LED display
Note: All combinations may not be valid, check spec sheet for valid part numbers.