Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 
Canada1-888-826-6342
International514-856-6928

Your One-Stop Source for Process Measurement & Control!

High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available

DP7600

High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available | DP7600

CAD940.00 DP7600

1 year warranty OmegaCare RoHS
  • 5-Digit Display
  • Dual Inputs Available
  • All Programming and Calibrating Via 5 Front Panel Switches
  • Programmable Digital Filter, 1 to 500 Hz Cutoff
  • 16-Bit A/D Converter (65000 Counts)
  • Tare (Zero) up to 50% of Span with Single Pushbutton
  • Peak Detect and Run Out Modes
  • 115/230 Vac Power, Field Selectable
Instrumentation for Pressure and Strain Measurements - View related products

Description

The DP7600 is a high speed load/strain meter. The unit performs 1000 conversions per second with limit checking and peak/runout tracking done at a user selectable rate (from 1 to 500 Hz). Peak and runout data can also be displayed using the front panel switches. A tare reading, up to 50% of span, can be entered with a single front panel push button.
The DP7700 is a high speed process/voltmeter with many of the same features. The DP7700 accepts most process inputs from 0-200 mV to 0-10 Vdc and 4-20 mA current loops. Transducer/loop power of ±15 Vdc @ 50 mA is standard.
Programming both meters is accomplished via five switches located on the front panel. The text at the top of the switch (NORMAL, PEAK, RUNOUT, TARE, ABS/REL) indicates its normal function. The text at the lower half of the switch (ENTER, UP, DOWN, NEXT, EXIT) indicates the switch’s function during setup and calibration.

SPECIFICATIONS
DP7600 Load/Strain Gage Meter

Excitation: +10 Vdc @ 50 mA, +5 Vdc @ 25 mA
Coarse Gain Setting: Selectable by switches on rear of unit Full Scale mV ranges: 5.1, 10.2, 15.3, 20.0, 26.3, 30.6, 35.1, 39.2
Bridge Resistance: 100 to 5000 Ohms. 4-wire or 6-wire configuration
DP7700 Process/Voltmeter
Excitation: ±15 Vdc, ±5 Vdc @ ±50 mA
Range/Input Impedance: 0-200 m Vdc 10 x 10e12 Ohms 0-5 Vdc 1 MOhms 0-10 Vdc 1 MOhms 4-20 mA 10 Ohms
Range Selection: Selectable by dip switch on rear of the unit

GENERAL SPECIFICATIONS
Accuracy: ± 0.01% of reading ± 1 count of A/D @ 25°C/77°F
Temperature Coefficient: 50 ppm/°C
Operating Temperature: -20 to 60°C (-4 to 140°F)
Display: -32768 to +32767 with programmable decimal points 0.56" (14mm) red LED
A/D Resolution : 16-bit
Input Bias Current: ±50 nA max ±100 pA/°C (per input channel)
Normal Mode Rejection:70 db
Rollover Error: ± 2 counts of A/D @ 25°C/77°F
Channels:One channel standard with second channel optional
Digital Filter: Programmable cutoff frequency 1 Hz to 500 Hz.
Display update: 3 times per second
Reading Rate: Limited to 1000 per second divided by number of channels
Input Analog Filter: 4 pole active antialias. 500 Hz cutoff on single channel unit and 250 Hz cutoff on dual channel unit
Power: 115/230 Vac selectable by switch on rear of unit DC Power (Optional): 10-30 Vdc @ 600 mA
Power Consumption: 8 Watts
Construction: Aluminum case
Dimensions: 69 H x 132 W x 175 mm D (2.7 H x 5.18 W x 6.9" D) (including I/O connector)
Panel Cutout: 63 H x 129 mm W (2.45 H X 5.06" W)
Weight: 370 g (13 oz)

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
RoHS
Description
DP7600 Star
CAD940.00
Availability: 11 weeks
RoHS compliant
High speed load and strain indicator
DP7600-R Star
CAD995.00
Availability: 11 weeks
RoHS compliant
High speed load and strain indicator with dual relay outputs
DP7600-A05 Star
CAD1,095.00
Availability: 11 weeks
RoHS compliant
High speed load and strain indicator with 0-5 Vdc analog output
DP7600-S2 Star
CAD1,020.00
Availability: 11 weeks
RoHS compliant
High speed load and strain indicator with RS232 serial
DP7700 Star
CAD940.00
Availability: 11 weeks
RoHS compliant
High speed process voltage and current indicator
DP7700-R Star
CAD995.00
Availability: 11 weeks
RoHS compliant
High speed process voltage and current indicator with dual relay outputs
DP7700-A05 Star
CAD1,095.00
Availability: 11 weeks
RoHS compliant
High speed process voltage and current indicator with 0-5 Vdc analog output
All dollar amounts on this site are shown in Canadian currency. Note: For units with multiple options consult Pressure Engineering for availability.
Ordering Example: (1) DP7600-A05 high speed load and strain indicator with 0-5 Vdc analog output, CAD1,095.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Input Type select from:
DP7600 for strain gage bridge inputs
DP7700 for process voltage or current inputs

(2) Option select from:
for no option leave blank
-R for dual 2.5 A form "A" relays
-AMA for 4 to 20 mA analog output
-A05 for 0 to 5 Vdc analog output
-A10 for 0 to 10 Vdc analog output
-S2 for ASCII RS232 serial interface
-S4 for ASCII RS485 serial interface
-DUAL for Second input channel requires S2 or S4 option
-DC9/18 for 9 to 18 Vdc power @ 600 mA
-DC18/36 for 18 to 36 Vdc power @ 500 mA
Note: All combinations may not be valid, check spec sheet for valid part numbers.