Designed for applications where
stainless steel may be required,
the FLR1000ST Series flowmeters
are rated to 500 psig. These units
are available to cover flow ranges
from 13 mL/min to 10 L/min. A 0 to
5 Vdc or 4 to 20 mA analog output
is standard with all units; Voltage
output models are also available
with an additional pulse output, or
with a 31?2 digit LCD readout.
SPECIFICATIONS Accuracy/Linearity: ±1% FS Repeatability: ±0.2% FS Pressure Rating: 34 bar (500 psig), maximum Operating Ambient: 5 to 55°C (41 to 131°F) Storage Ambient: 0 to 70°C (32 to 158°F) Temperature Sensitivity: = ±0.2% FS/°C Wetted Parts: 316 SS, epoxy, Pyrex® glass, PPS, FKM O-rings, sapphire bearings Filtration (Recommended): 25 microns or less Analog Output: Linear 0 to 5 Vdc or 4 to 20 mA; non-isolated signal Pipe Connections: 316 SS compression tube fittings, provided Electrical Connections: 4-pin male connector for both power and signal; included with 0.9 m (3') cable Power: Voltage Output Models: 11.5 to 12.5 Vdc (0.4 W @ 12 Vdc) Current Output Models: 18 to 24 Vdc (1.2 W @ 24 Vdc), 50 mA
All dollar amounts on this site are shown in Canadian currency.Note: Comes complete with 0.9 m (3') cable and operator’s manual.
For optional 3-PT NIST Calibration with certificate for gas (FLR1001 to FLR1006 and FLR1200 to FLR1206) add suffix "-NISTAIR" to model number, add $350 to price.
For optional 3-PT NIST Calibration with certificate for liquid (FLR1007 to FLR1013) add suffix "-NISTWATER" to model number, add $300 to price.
Please dowload specification page for all available options.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)