The FMG3000 Series magmeters
are insertion-style magnetic flow
sensors with no moving parts. All
models are constructed of
corrosion-resistant materials to
provide long-term reliability with
minimal maintenance costs. When
these magmeters are used with
OMEGA’s comprehensive line of
installation fittings, sensor
alignment and insertion depth are
automatic. Fittings are required for
installation. Please refer to accessories below.
These versatile, simple-to-install
flowmeters deliver accurate flow
measurement over a wide dynamic
range in pipe sizes ranging from
0.5 to 8", satisfying the
requirements of many diverse
applications. FMG3000 Series
magmeters offer a variety of output
options for use with OMEGA flow
instrumentation that has a
frequency or 4 to 20 mA output.
Flow velocity measurement is
compensated for temperature via
an integrated temperature sensor.
Performance Linearity: ±1% rdg ±0.01 m/s (0.033 ft/s) Repeatability: ±0.5% of rdg @ 25°C (77°F) Minimum Conductivity: 20 µS/cm Pipe Size Range: 0.5 to 8" Flow Range: 0.05 to 5 m/s (0.15 to 16.4 ft/s)
Sensor Body/Electrodes and Grounding Ring: PP: Polypropylene/316L SS PVDF: PVDF/316L SS (Hastelloy®) O-Rings: FPM (FKM) standard Other Materials: Case: PBT Protection Rating: NEMA 4X (IP65)
Power Requirements 4 to 20 mA: 21.6 to 26.4 Vdc, 22.1 mA max Frequency: 4.5 to 26.4 Vdc, 15 mA max. Reverse polarity and short circuit protected
Output Specifications Current Output (4 to 20 mA): Loop Accuracy: 32 µA max error (25°C @ 24 Vdc) Isolation: Low voltage <48 Vac/Vdc from electrodes and auxiliary power Display (Optional): Characters: 2 x 16 Window: Polyamide SPDT Relay: 5 A @ 30 Vdc max, 5 A @ 250 AC max Solid State Relay: 50 mA @ 30 Vdc, 50 mA @ 42 Vac Maximum Cable: 300 m (1000') Error Condition: 22.1 mA Max Loop Resistance: 300 Ω Frequency Output: Max Pull-Up Voltage: 30 Vdc Max Current Sink: 50 mA, current limited Maximum Cable: 300 m (1000')
Environmental Requirements Storage Temperature: -20 to 70°C (-4 to 158°F) Relative Humidity: 0 to 95% (non-condensing) Operating Temperature: Ambient: -10 to 70°C (14 to 158°F) Media: 0 to 85°C (32 to 185°F) Max Operating Pressure: 10.3 bar @ 25°C (150 psi @ 77°F), 1.4 bar @ 85°C (20 psi @ 185°F) Standards and Approvals: CE, NEMA 4X (IP65)
All dollar amounts on this site are shown in Canadian currency.Note: Comes complete with operator’s manual and liquid tight connector.
Display units also include 3 relays: 2 SPDT and 1 solid state.
Ordering Example: (1) FMG3102-PP Polypropylene/316LSS magmeter with 4 to 20 mA output, CAD1,140.00 plus (1) FP-5360S 6, CAD306.00, CAD1,140.00 + 306.00 = CAD1,446.00
Part Number Builder
Build Your Part Number Below
Pipe Size select from: 00 for 0.5 to 4 inch 10 for 5 to 8 inch
Output select from: 1 for Frequency 2 for 4 to 20 mA
Wetted Materials select from: PP for Polypropylene/316L SS PVDF for PVDF/316L SS
Display Option select from: Nothing(leave field blank) for Without display -D for With display
Additional Option select from: Nothing(leave field blank) for None -HA for PVDF models with Hastelloy electrodes
Note: All combinations may not be valid, check spec sheet for valid part numbers.
FMG-3000 Series Display Version - Magmeter