Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 
Canada1-888-826-6342
International514-856-6928

Your Source for Process Measurement & Control

Rugged, Reliable All-metal Sensors

FP-5200 and FP-3

Rugged, Reliable All-metal Sensors | FP-5200 and FP-3

Rugged, Reliable All-metal Sensors

CAD640.00 FP-5200

2 year warranty
  • Stainless Steel Paddle Wheel Sensors
  • Boiler Water Feed Lines
  • Turbine Steam Condensate
  • Energy Management Systems, HVAC
Turbine, Paddle Wheel & Positive Displacement Flow Meters - View related products

Description


ACCURACY THAT PAYS OFF
In the FP-5200 sensor housing, a magnet is surrounded by a coil, creating a magnetic field. As the liquid flow causes the rotor to spin, each blade passing this coil concentrates the lines of magnetic force, producing a repeatable AC sine wave output. The FP-5200 also features OMEGA’s patented "open-cell" rotor, for increased linearity at ±1% over the full dynamic range of 1.6 to 20 fps, with negligible head loss.

COMPATIBLE, VERSATILE INTERFACING
The FP-5200 is completely compatible with FPM Series powered flow indicators, controllers, and totalizers, to give increased flexibility in system design. It also interfaces easily with digital computers and with a variety of other external equipment.

FP-5200 FLOW SENSOR
When you're looking for the added strength of an all-metal flow sensor, make it the FP-5200. It permits the high degree of accuracy and reliability you demand, without added cost. Compare it to traditional metal flowmeters, where the price increases dramatically with pipe size. In contrast, you can install the FP-5200 insertion flow sensor in pipe sizes ranging from ½ to 12" without a lot of additional cost, because the sensor price increases only slightly for larger pipe sizes. Furthermore, it's accurate to ±1% of full scale. Installation is easy. Use the FP-5200 locally, or in a remote area up to 100 feet from the meter or controller without signal amplification. It needs no external power or battery. Just one operator, simple tools, an FP-5200 Flow Sensor, a few minutes . . . and you're on-line. Additionally, the all-stainless-steel flow sensor accurately measures a wide variety of fluids, even under high pressure and temperature conditions [pressures up to 1500 psi, temperatures up to 150°C (300°F)].

Flow Range
Pipe
Size
½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 5" 6" 8" 10" 12"
Range
(gpm)
1.6
to
19
2.7
to
34
4.4
to
54
7.4
to
94
10.1
to
127
16.8
to
210
24
to
300
37
to
461
63
to
794
100
to
1247
144
to
1801
250
to
3119
393
to
4915
559
to
6977


SPECIFICATIONS
Output Signal: Sine wave
Output Frequency: 12 Hz per ft/sec, 80 mV peak-to-peak per fps nominal
Flow Rate Range: 1.6 fps to 20 fps
Output Amplitude: 5 to 8 mV/P-P/Hz
Source Impedance: 10 kΩ
Accuracy: ±0.2 fps
Linearity: ±1% of full range
Repeatability: ±0.5% of full range
Max Viscosity: 1 centipoise (water); up to 5 cp above 5 fps velocity
Materials: Rotor: CD4MCU SS; Rotor Housing: 316 SS; Rotor Shaft: Tungsten Carbide; Transducer Body: 347 SS; Top Flange: 316 SS; Cap 316 SS
Rotor Bearing: Fluoroloy B (PTFE-based fluoroplastic)
Cable Length: 7.5 m (25'), can be extended up to 30 m (100') with copper wire
Maximum % Solids: 10%, with particulate size not exceeding 5 mm cross section or length
Weight: 0.9 kg (2 lb)

METAL HOT-TAP FLOW SENSOR
The metal hot-tap sensor allows the user easy sensor installation and removal without shutting down the process stream. Compatible with Mueller drill assemblies, this new hot-tap sensor can be quickly installed into pipe sizes from 1½ to 24". This hot-tap assembly is compatible with any 1½ NPT female pipe fitting such as weldolets and saddles. Installation fitting not supplied.

SPECIFICATIONS
Flow Range: 0.3 to 20 fps
Wetted Parts: 316 and CD4MCU stainless steel; FKM and PEEK
Power Input: 5 to 24 Vdc @ 10 mA max
Max. Pressure/Temperature: 82°C (180°F) up to 250 psig
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.
Qty
Description
Rugged All-Metal Paddlewheel Sensors
Click to expand/minimize a list of what others bought with theFP-5200
FP-5200 Star
CAD640.00
Availability: In Stock
 
½"-1" Mini-Tap Pipe Fitting Size/Style
Click to expand/minimize a list of what others bought with theFP-5201
FP-5201 Star
CAD640.00
Availability: In Stock
 
1¼"-12" Mini-Tap Pipe Fitting Size/Style
  
FP-5202 Star
Consult Sales  
Availability: 
 
 
2-12" Saddle Pipe Fitting Size/Style
Hot Tap Flow Sensors
  
FP-3-1500-2B Star
CAD1,075.00
Availability: 6 weeks
 
1½" MNPT Hot Tap Flow Sensor
Accessories/Replacement Parts
  
FP-52509 Star
CAD69.00
Availability: 1 week
 
Replacement Rotor Assembly with bearings
  
FP-52618 Star
CAD12.50
Availability: In Stock
 
Replacement Gasket
  
FP-52628 Star
CAD99.00
Availability: 5 weeks
 
Replacement Cap Kit (gasket and hardware)
  
FPM-5000-SCAK Star
CAD64.00
Availability: 1 week
 
Sensor Conduit Adaptor Kit
All dollar amounts on this site are shown in Canadian currency. Note: Comes complete with operator's manual.


Ordering Example: (1) FP-5200 1/2, CAD640.00  plus (1) FP-5205 1/2, CAD525.00   plus (1) TX4-100 100 Foot 4 Conductor Wire, CAD44.00 , CAD640.00 + 525.00 + 44.00 = CAD1,209.00

Product Manuals:

Download FP-5200 - Metalex Paddle Wheel Flow Sensor
Download FP-3-1500 - FP-2540/FP-3-1500 HIGH PERFORMANCE FLOW SENSOR