The FPD3100 Series positive
displacement flowmeters are
affordable and accurate. One
primary feature is the ability to
maintain consistent accuracy
despite changing viscosity
conditions. The meter’s solid
construction and excellent dynamic
response are well suited to the
measurement of many corrosives
as well as other non-abrasive fluids.
Since there is no need for straight
run piping upstream or downstream
of the flowmeter, the FPD3100
flowmeters are simple to use and
to install. The meter has good
resolution and high accuracy at
low flow rates.
Specifications Accuracy: ±0.5% of reading Repeatability: ±0.03% Fitting Type: NPT: Female BSP: “-BSP” option Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA) Reed Sensor Power: 30 Vdc (500 mA) Output Options: Pulse Output: Standard NPN 4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options Rate: User defined Total: Resettable Accumulated-Total: Non-resettable FPD3105 Minimum Viscosity: 1cPs Maximum Viscosity: 1000 cPs standard Maximum Pressure: See chart on next page Strainer Size: See ordering chart on next page Mounting: Shafts must be in a horizontal plane Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option Cable Length: 1 m (3') stripped ends, non-display models Mounting: Pipe Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included) Liquid Temperature: -40 to 80°C (-40 to 176°F), -20 to 60°C (-4 to 140°F) for display models Materials Body and Rotors: PPS Seals: FKM, FEP (FPD3105) Fasteners: Stainless steel Cable Insulation: PVC Shaft: Hastelloy C Enclosure: NEMA 6 (IP67)
All dollar amounts on this site are shown in Canadian currency.Note: Comes complete with lithium battery (-D) and operator’s manual.
For units with a battery powered digital display add “-D” to the model number, for an additional charge.
For units with a DC powered digital display and 4 to 20 mA output add “-D-A” to the model number, for an additional charge.
For units with BSP connections add “-BSP” to the model number, no additional charge.
Oval Gear Flowmeters for use with Corrosive Chemicals
Digital Displays with Analog Output Options