The FPUD1000 Series are positive
displacement metering pumps. The
FPUD1000 Series is designed to
inject chemicals into piping systems
and is capable of injecting against a
high system pressure up to 150 psi
(10.4 bar). All models are equipped
with a front mounted mechanical flow
rate adjustment knob.
SPECIFICATIONS Max Working Pressure: 10.3 bar (150 psig) Max Fluid Temperature: 54°C (130°F) Ambient Temperature: -10 to 43°C (14 to 110°F) Max Viscosity: 1000 centipoise Max Suction Lift: 3 m (10') water, 0 psig Stroke Adjustment Range: 20:1, 5 to 100% stroke length Cycle Time Adjustment Range (FPUD1100 Models Only): 20:1, 5 to 100% cycle time Motor Speed Adjustment Range (FPUDM and FPUDVM Models Only): 20:1, 5 to 100% Duty Cycle: Continuous Enclosure: NEMA (IP21), FPUD1100 & FPUDM models; NEMA 3R (IP23), FPUDV and FPUDVM models; VALOX® thermoplastic Wetted Materials: Polypropylene pump head, footvalve/strainer and check valve body/insert, PVDF cartridge valve body and tube adaptors, ceramic check balls; TFE/P and FKM O-rings; Hastelloy C-276 spring Power: 115 Vac/60 Hz; 1.87 A max; 220 Vac/60 Hz, 220 or 240 Vac/50 Hz also available (special order only) Connections:3⁄8" OD suction and discharge tubing Dimensions: 159 H x 235 W x 254 mm D (6.25 x 9.25 x 10") Weight: 5.4 kg (12 lb) max PFUDV Digital Display Models Additional Specifications External Speed Control: 4 to 20 mA, 0 to 10 Vdc, and pulse inputs Display: LCD; indicate motor speed or input signal values, and service and alarm indicator icons Dimensions: 159 H x 267 W x 254 mm D (6.25 x 10.5 x 10")
All dollar amounts on this site are shown in Canadian currency.Note: * Note: 260.8 GPD = 100 PSI max.; 305.7 GPD = 80 PSI max.; 360.0 GPD = 25 PSI max.
Comes complete with suction tube foot valve & strainer, suction tube weight, 1.5 m (5') PVC suction tubing, 3 m (10') PE discharge tubing and injection fitting with internal back-flow check valve, mounting hardware and operator’s manual.
Ordering Example: (1) FPUDV1101 Variable Speed Digital Pump, CAD1,670.00
Part Number Builder
Build Your Part Number Below
Variable Speed select from: Nothing(leave field blank) for None V for Variable speed digital touchpad VM for Variable speed dial knob control
Motor Speed Adjustment select from: Nothing(leave field blank) for None M for Motor speed adjustment
Max Feed Rate select from: 01 for 15.0 GPH (56.8 LPH) 02 for 12.7 GPH (48.2 LPH) 03 for 10.8 GPH (41.1 LPH) 04 for 6.4 GPH (24.6 LPH) 05 for 4.9 GPH (18.9 LPH) 06 for 3.8 GPH (14.4 LPH) 07 for 3.0 GPH (11.5 LPH) 08 for 2.4 GPH (9.1 LPH) 09 for 1.5 GPH (6.0 LPH)
Note: All combinations may not be valid, check spec sheet for valid part numbers.