Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 
Canada1-888-826-6342
International514-856-6928

Your Source for Process Measurement & Control

High Temperature Constant Wattage Heating Cable

KE Series

High Temperature Constant Wattage Heating Cable | KE Series

High Temperature Constant Wattage Heating Cable

CAD8.10 KE4-120

RoHS
  • Continuous Exposure Rating up to 500°F
  • Low Watt Density
  • Parallel Resistance Heater
  • Cut-to-Length at the Job Site
  • Constant Watt Density
  • All Common Voltages Available
  • Moisture and Chemical Resistance
  • Continuous Electrical Ground
  • Designed for freeze protection and process temperature maintenance.
Electrical Heating Cable Systems - View related products

Description

The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.

OMEGALUX® KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

Max. Circuit Length**-KE Series
Power 120V 208V 240V 277V 480V
4 Watts/ft349"606"699"806"1398"
8 Watts/ft247"428"494"570"988"
12 Watts/ft202"350"403"466"807"
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
RoHS
Description
Prices below are per foot
4 WATTS/FT
KE4-120 Star
CAD8.10
Availability: 8 weeks
RoHS compliant
high temperature, constant wattage cable, 4 W/FT, 120 V
KE4-240 Star
CAD16.75
Availability: 1 week
RoHS compliant
high temperature, constant wattage cable, 4 W/FT, 240 V
8 WATTS/FT
KE8-240 Star
CAD8.10
Availability: 8 weeks
RoHS compliant
high temperature, constant wattage cable, 8 W/FT, 240 V
12 WATTS/FT
KE12-120 Star
CAD8.10
Availability: 8 weeks
RoHS compliant
high temperature, constant wattage cable, 12 W/FT, 120 V
KE12-240 Star
CAD8.10
Availability: 8 weeks
RoHS compliant
high temperature, constant wattage cable, 12 W/FT, 240 V
Accessories
KE-UC-KIT Star
CAD53.00
Availability: 1 week
RoHS compliant
Termination Kit (for KE Series)
KE-KC-KIT Star
CAD53.00
Availability: 8 weeks
RoHS compliant
Termination Kit (for KE Series)
FE-UC-KIT Star
CAD51.00
Availability: 8 weeks
RoHS compliant
Termination Kit (for FE Series)
FE-KC-KIT Star
CAD55.00
Availability: In Stock
RoHS compliant
Termination Kit (for FE Series)
SK-KIT Star
CAD28.50
Availability: 8 weeks
RoHS compliant
Splice Kit
FE-SK-KIT Star
CAD37.50
Availability: 8 weeks
RoHS compliant
Splice Kit (for FE Series)
RTV-SS Star
CAD12.25
Availability: In Stock
RoHS compliant
Silicone Sealant

Order By Part Number

Part Number
Qty
Part Number
Qty


All dollar amounts on this site are shown in Canadian currency. Note:
*Price per foot. When ordering specify desired length in feet. 25 foot minimum.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F. To complete your system the following accessories are recommended: (1) Termination kits for KE cable (see page B-30 for specifications), (2) control options - see Section P for a complete selection of controllers and thermostats.