Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 

Your One-Stop Source for Process Measurement & Control

Metric Multiconductor Feedthroughs

MFT Metric Series

Metric Multiconductor Feedthroughs | MFT Metric Series

Metric Multiconductor Feedthroughs

See All Models Below

  • Pressure or Vacuum Applications
  • Seals Multiple Thermocouples and Protection Tubes
  • Available in Both NPT and ISO T/BPST Mounting Threads
  • Up to 16 Probes in 1 Fitting
  • Blank Sealing Plugs Included
  • 3 to 16 Probes
  • 416 SS Body and Cap
  • 316 SS Ferrules Standard
  • PTFE Ferrules Available
  • OMEGALOKR Ferrules Standard
  • 1 to 6 mm (0.040 to 1.4") Probe Diameters
Thermocouple Connectors and Panel Systems - View related products


These all-new multiconductor feedthroughs are designed for applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy-duty 416 SS construction allows use of this fitting in high-pressure or vacuum applications. Probes between 0.040" and 1/4" in diameter can be used in these feedthroughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 for 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter, and 16 for 0.040" diameter probes.

All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.
Place Order(Specify Model Number)
Part Number/ Desc.
Thread is ISO/BPST
MFT-M10-3 Star
Availability: 3 weeks
1.0mm probe, 3 probes, 1/4in. Thread
MFT-M10-5 Star
Availability: 3 weeks
1.0mm probe, 5 probes, 1/4in. Thread
MFT-M10-6 Star
Availability: 3 weeks
1.0mm probe, 6 probes, 1/4in. Thread
MFT-M15-3 Star
Availability: 3 weeks
1.5mm probe, 3 probes, 1/4in. Thread
MFT-M30-3 Star
Availability: 1 week
3.0mm probe, 3 probes, 1/4in. Thread

Order By Part Number

Part Number
Part Number

All dollar amounts on this site are shown in Canadian currency. Note: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required, add suffix "-PTFE" to the model number shown in the Order By Part Number fields. Add additional cost per ferrule. One ferrule needed for each conductor.
Ordering Example: (1) MFT-M10-6 1.0mm probe, 6 probes, 1/4in. ISO/BPST Thread, CAD141.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:

(1) Diameter of Probe select from:
-M10 for 1.0mm
-M15 for 1.5mm
-M30 for 3.0mm
-M45 for 4.5mm
-M60 for 6.0mm

(2) Number of Probes select from:
-3 for 3 probes
-5 for 5 probes
-6 for 6 probes
-8 for 8 probes
-10 for 10 probes
-12 for 12 probes
-16 for 16 probes
Note: All combinations may not be valid, check spec sheet for valid part numbers.