OMEGA® sturdy multi-pin connectors provide an efficient means of joining multiwire thermocouple cables. They can be used with multiple OMEGA extension stranded wire for rapid, convenient connections and for dismantling an apparatus without handling individual sensors. When used with MTC Series pins, the connector design utilizes a combination of resilient and rigid dielectric insulators to eliminate internal air voids and prevent the passage of air and moisture into or through the connector. Connectors can withstand ambient temperatures to 200°C (392°F), contributing to an extended connector life.
1. MS Standard Assembly Tools are
required to crimp and assemble
connectors properly. Order with
2. Match pins and sockets to
A 12-cavity connector carries
6 thermocouple circuits (pairs)
requiring: 6 positive alloy pins or
sockets and 6 negative alloy pins
or sockets per body.
3. Order bodies in mating pairs.
Style MC mates with both
style FF and style FC.
4. Backshell cable clamps are
recommended with each cord
Please review Product Spec Sheet pdf for complete product specifications on the
MTC Connectors, MTC Precision Contacts, and HPC Economical Contacts
New M12 Connector with Thermocouple PIns and Sockets
Omega has a new connector which can be wired for up to 2 thermocouples with a secure M12 connection.
To see our New M12 connectors visit M12-FM_Series
All dollar amounts on this site are shown in Canadian currency.Note: Contacts and connector bodies are sold separately. Backshell cable clamps provide effective support for the cable at the male or female connector and prevent twisting and pulling.
Ordering Example: (1) HPC-AL-P 20/PK Hollow Male Pin Alumel, CAD94.00 plus (1) HPC-AL-S 20/PK Hollow Female Socket Alumel, CAD139.00 plus (1) HPC-CH-P 20/PK Hollow Male Pin Chromel, CAD94.00 plus (1) HPC-CH-S 20/PK Hollow Female Socket Chromel, CAD139.00 plus (1) MTC-12-FF 12 Cavity Female Flanged Body, CAD62.00 plus (1) MTC-12-MC 12 Cavity In-line male cable connector with threaded coupling., CAD62.00 plus (1) MTC-12-SHL Backshell cable clamp, CAD102.00, CAD94.00 + 139.00 + 94.00 + 139.00 + 62.00 + 62.00 + 102.00 = CAD692.00
Part Number Builder
Build Your Part Number Below
Number of Cavities select from: 5 for 5 Cavities 12 for 12 Cavities 24 for 24 Cavities 41 for 41 Cavities 55 for 55 Cavities
Connector Type select from: MC for MC Male Cord Connector FC for FC Female Cord Connector FF for FF Female Flanged Connector SHL for SHL Backshell Cable Clamp Connector
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.