Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 
Canada1-888-826-6342
International514-856-6928

Your Source for Process Measurement & Control

Washdown Stepper Motors for Wet and Dusty Environments

OMHW Series

Washdown Stepper Motors | OMHW Series
New

Washdown Stepper Motors

See All Models Below

1 year warranty
  • Bipolar IP65-Rated Step Motors
  • NEMA 23, 24 and 34 Frame Sizes Available
  • Integral 3 m (10') Shielded Cable with Cable Gland
  • Sealed Laminations
  • Front Shaft Seal
  • 200 full steps per revolution (1.8° per step)
Drives & Motors - View related products

Description

OMEGA® is pleased to announce the addition of NEMA size 23, 24 and 34 stepper motors with IP65 ratings for operation in severe environmental conditions. The OMHW series are dust proof and resistant to low pressure water jets, and are ideal for applications in wet factory environments such as the food and beverage industry or outdoor use. Key features include a nickel plated brass cable gland, sealed laminations, and front shaft contact seal. All models have an internal corrosion-resistant film coating as standard. IP65 specifies a product that is dust tight (no ingress of dust; complete protection against contact) and protected against water jets (water projected by a nozzle from any direction shall have no harmful effects).

Important Note About Motor Current vs Drive Current:
When setting the drive current, you should multiply the stepper motor's nameplate current by 1.2. This provides the correct conversion from the motor's full-step nameplate rating to the drive's current setting. If the motor nameplate current is specified as 5 Amps, set the drive current to 6 Amps (5 x 1.2) to achieve full performance.

The OMHW stepper motors are 8-lead motors, offering the flexibility of either series or parallel connection. The motors should be series connected for best torque at low speeds, and parallel connected for best torque at higher speeds.

Motor Wiring --- Parallel Connection (8-lead motors):
Drive A+ = Orange + Black/White
Drive A- = Black + Orange/White
Drive B+ = Red + Yellow/White
Drive B- = Yellow + Red/White

Motor Wiring --- Series Connection (8-lead motors):
Drive A+ = Orange
Drive A- = Black
Drive B+ = Red
Drive B- = Yellow
Connect Orange/White to Black/White (not connected to drive)
Connect Red/White to Yellow/White (not connected to drive)
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
OMHW23-598 Star
CAD268.00
Availability: 3 weeks
 
NEMA 23 step motor, 158 oz-in minimum holding torque, 4.24 A/phase (parallel)
OMHW23-753 Star
CAD283.00
Availability: 1 week
 
NEMA 23 step motor, 153 oz-in minimum holding torque, 1.41 A/phase (parallel)
OMHW23-601 Star
CAD309.00
Availability: 4 weeks
 
NEMA 23 step motor, 269 oz-in minimum holding torque, 4.24 A/phase (parallel)
OMHW23-754 Star
CAD329.00
Availability: 3 weeks
 
NEMA 23 step motor, 227 oz-in minimum holding torque, 1.41 A/phase (parallel)
OMHW24-108 Star
CAD435.00
Availability: 1 week
 
NEMA 24 step motor, 354 oz-in minimum holding torque, 4.0 A/phase (parallel)
OMHW34-696 Star
CAD575.00
Availability: 1 week
 
NEMA 34 step motor, 1062 oz-in minimum holding torque, 4.06 A/phase (parallel)
OMHW34-506 Star
CAD585.00
Availability: 1 week
 
NEMA 34 step motor, 1260 oz-in minimum holding torque, 5.6 A/phase (parallel)
All dollar amounts on this site are shown in Canadian currency. Ordering Example: (1) OMHW23-598 Washdown stepper motor, 158 oz-in minimum holding torque, 4.24 A/phase (parallel), CAD268.00