Profile probes consist of several smaller diameter
thermocouples placed inside a single outer sheath. They are
best suited for profiling the temperature at various points
along a single axis. They can be used in many different
applications: furnaces, reactors, heat exchangers, air
ducts, and more. Mounting these multipoint probes with compression
fittings permit easy adjustment of insertion position.
Profile Probe Configurator
The table below shows some typical configurations of profile probes. Omega also offers the Profile Probe Configurator
a flexible online tool that will allows a user to configure a custom profile probe with up to 6 thermocouples. The Profile Probe
Configurator is easy to use and does not require any log-on information. It provides in realtime the the price and availability of the configured probe.
The probe may be immediately ordered online or just note the part number and order anytime in the future by visiting Omega.com's Quick Order Page.
The same part number may even be used for ordering through the telephone and fax. Visit the Profile Probe Configurator now.
All dollar amounts on this site are shown in Canadian currency.Note: NOTE: Maximum Continuous Temperatures: J, T: 500°F (260°C); E: 570°F (300°C); K: 1200°F (650°C) † First point always at probe tip. Ordering Example: (1) PP6-36-K-G-18 6 Point Profile Probe, 18, CAD560.00
Part Number Builder
Build Your Part Number Below
Number of Sensing Points select from: PP3-36 for 3 Sensing Points PP6-36 for 6 Sensing Points PP10-36 for 10 Sensing Points
Thermocouple Type select from: J for J Thermocouple K for K Thermocouple T for T Thermocouple E for E Thermocouple
Junction Style select from: U for Ungrounded G for Grounded
Sensing Length select from: 18 for 18 Inches 36 for 36 Inches
Note: All combinations may not be valid, check spec sheet for valid part numbers.