This general purpose RTD probe transitions directly to 36" lead wires without the use of a metal transition fitting. This design makes for a more compact probe when space limitations are a factor. Note that the point where the lead wire exits the probe sheath will not be as durable as on the PR-11 probe, which uses the metal transition and spring as strain relief.
For special options consult Sales or Temperature Engineering for availability and pricing.
All dollar amounts on this site are shown in Canadian currency.Note:
For 4-wire configurations change the "2" in the model number to a "3" and add $15 to the price (4-Wire Configuration Not Available in 1/8" or 3mm Probe Diameters).
To order with shrink tube strain relief, specify "-ST" at end of model number. To order probes in intermediate lengths, change model number, using next longer probe price. Over 24", add $1 per inch of probe length. Stainless steel overbraid or BX cable also available. For leads longer than 40", add lead length to end of model number and $2.25 per foot to the price. Ordering Example: (1) PR-10-2-100-1/4-12-E RTD probe, lead type 2 (3-wire configuration), 100 ohms, 1/4, CAD88.00
Part Number Builder
Build Your Part Number Below
Probe Diameter select from: 1/8 for 1/8 inch 3/16 for 3/16 inch 1/4 for 1/4 inch
Sheath Length select from: 6 for 6 inch 12 for 12 inch 18 for 18 inch 24 for 24 inch CUSTOM for custom length in inches(whole numbers only 2 to 72 )
Note: All combinations may not be valid, check spec sheet for valid part numbers.