This RTD probe assembly has a heavy duty 3-prong Omega "OTP" style connector for easy installation to extension cables, hand held meters or other instrumentation. The sheath can be simply placed into a container, or installed into place using an optional "BRLK" or "SSLK" compression fitting. The precision 100 ohm Class A DIN platinum element contained in the sensor will provide years of accurate and dependable service.
All dollar amounts on this site are shown in Canadian currency.Note: Standard: Specify 1/8, 3/16 or ¼" for probe diameter in inches. 3-wire lead configuration standard, others available. Add $1 per inch for lengths above 24".
Metric: Specify M30 for 3mm, M45 for 4.5mm or M60 for 6mm probe diameters. Add $1 per 25mm for lengths above 600mm.
RTD probes cannot be bent in the field, Omega offers custom bending, consult our Sales Department.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) PR-13-2-100-1/8-6-E Quick disconnect type PR-13 probe with mating connector, style 2 wiring (3 lead configuration), 100 ohm Class A DIN platinum element, 1/8, CAD124.00
Part Number Builder
Build Your Part Number Below
Probe Diameter select from: 1/8 for 1/8 inch 3/16 for 3/16 inch 1/4 for 1/4 inch
Sheath Length select from: 6 for 6 inch 9 for 9 inch 12 for 12 inch 18 for 18 inch 24 for 24 inch CUSTOM for custom length in inches(whole numbers only 2 to 72 )
Note: All combinations may not be valid, check spec sheet for valid part numbers.