Straight Probe Assembly, Cable Runs Directly to the Sensing Element (No Transition Fitting)
Contains a Precision 100 Ohm Class B DIN Platinum Thin Film Element
Temperature Range: -50 to 500ºC
Compact Design for Applications with Space Restrictions
Available in 1/4", 3/16", 4.5mm and 6mm Diameters in Various Lenghts (Note: Not Avaliable in 1/8" or 3mm Diameters)
2-, 3- or 4-Wire Fiberglass Insulated and Jacketed Cables with Stainless Steel Overbraid
All Sensors Supplied to IEC60751/ASTM E-1137 Color Codes
Also Available With PFA Insulated Cables (260ºC Maximum Temperature), Fiberglass Insulated and Jacketed Cables -GG) or Fiberglass Cables With BX Amored Hose (-BX). Fiberglass Cables have 500ºC Maximum Temperature, See Individual Product Sheets
These general purpose Platinum RTD probes contain Omega's DIN Platinum thin film RTD elements connected directly to a fiberglass insulated, fiberglass jacketed, stainless steel overbraided cable without the need for extension wires or metal transition fittings. This design makes for a more compact and reliable probe where space limitations are a factor.
Note: This product is not available in 1/8" or 3mm probe diameters. If a 1/8" or 3mm diameter probe is required, the PRTF-11 with transition fitting or the PRTF10-E-BX with square locked metal hose are recommended.
All dollar amounts on this site are shown in Canadian currency.Note: Standard: To order probes in intermediate lengths (2" minimum), change length in model number and use next longer probe price. To order 2-wire sensors, change "-2" to "-1" in the model number at the same price. To order 4-wire sensors, change "-2" to "-3" in the model number and add $5 to the price. For probe lengths over 24", change length in model number and add $1 per inch of probe length. For cables longer than 40", add cable length to end of the model number and add $2.50 per foot. Metric: To order probes in intermediate lengths (50 mm minimum), change length in model number and use next longer probe price. For probe lengths over 600 mm, change length in model number and add $1 per 25 mm of probe length. For cables longer than 1 m, add cable length to end of model number and add $7.50 per meter. To order with shrink tube strain relief, specify “-ST” at the end of the model number at no additional charge. For MTP or OTP connectors, add “-MTP” or “-OTP” to model number and $8. (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) PRTF-10-2-100-1/4-12-E-SB 100 Ohm Class B DIN Platinum Thin Film RTD with a 1/4, CAD60.00
Part Number Builder
Build Your Part Number Below
Probe Diameter select from: 1/4 for 1/4 inch Diameter 3/16 for 3/16 inch Diameter M60 for 6mm Diamater M45 for 4.5mm Diamater
Sheath Length select from: 6 for 6 inch Length 9 for 9 inch Length 12 for 12 inch Length 18 for 18 inch Length 24 for 24 inch Length 150 for 150mm Length 225 for 225mm Length 300 for 300mm Length 450 for 450mm Length 600 for 600mm Length
Connectors select from: Nothing(leave field blank) for Standard Unit -MTP for Miniature 3-Prong Miniature Connectors (Flat Pins) -OTP for Standard 3-Prong Connectors (Round Pins)
Note: All combinations may not be valid, check spec sheet for valid part numbers.