The PRTXD Series are two-wire
transmitters that provide a 4 to 20 mA
signal representing temperature.
The units include a 3 1/2 digit display
and the RTD sensor. The NEMA 4X
(IP66) housing protects the
Units are available with
4 inch or 12 inch fixed length or
spring loaded RTD probes. Spring loaded
RTD probes provide good thermal contact
when used in thermowells.
SPECIFICATIONS Sensor: 100 W RTD element, 0.00385 alpha coefficient IEC-751 class B: ±0.3°C at 0°C, ±1.1°C at 150°C Display: 41.2 digit LCD, 1.2" digit height, 4 readings per second, nominal display update rate Out of Range Indication: ALARM 1: On display above 200°C (392°F) ALARM 2: On display below -50°C (-58°F) Loop Supply Voltage: Any DC supply/loop resistance that maintains 8 to 32 Vdc at gauge terminals (reverse polarity protected) Loop Output Characteristics: 4 to 20 mA output (see chart for loop voltage characteristics), minimum 8 V required at gauge terminals at all times for proper operation Test Function: Front panel TEST button when held, sets loop current and display to test calibration level, independent of temperature input to allow testing of system operation Wiring Connections
(See Drawing): 0.9 m (3') long, 2-conductor 22 AWG cable Material and Color: NEMA 4X (IP66) ABS/Polycarbonate housing, light gray gasketed rear cover connection and probe material: 1.2 NPT male hex nipple, 316 stainless steel probe sheath Operating Temperature (Electronics): -20 to 85°C (-4 to 185°F) Storage Temperature: -40 to 95°C (-40 to 203°F) Weight: Transmitter: Approx 340 g (12 oz) Shipping Weight: Approx 450 g (1 lb) Range: -50 to 200°C (-58 to 392°F) Resolution: 0.1 degree Accuracy: ±0.1% of span plus max sensor error of ±0.3°C at 0°C or ±1.1°C at 150°C
All dollar amounts on this site are shown in Canadian currency.Note: Comes with complete operator’s manual. * Spring-Loaded typically used with Thermowell Ordering Example: (1) PRTXD-4 RTD Temperature Transmitter 4 inches long, CAD530.00