OMEGA's PX01 is a very high accuracy,
low-noise, 4 to 20 mA
output industrial pressure
transmitter. Its all stainless steel
construction and hermetically sealed
case make it suitable for harsh
environments. A broad
of 15 to 71°C (60 to 160°F) makes
this transmitter very stable with
The PX01 is available in gage,
absolute, or sealed models, as
well as in psi or metric ranges.
NPT and 7/16-20 O-ring seal fittings
are available for industrial and
The PX01 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-160 mbar to
0-400 bar pressure ranges.
Please see the PXM01 for complete details, or contact our Pressure department for more information.
SPECIFICATIONS 4 to 20 mA Output Excitation: 10 to 40 Vdc Output: 4 to 20 mA ±0.06 mA Zero Balance: +4 mA ±0.02 mA Linearity: ±0.05% FSO Hysteresis: ±0.05% FSO Repeatability: ±0.05% FSO Sensing Element: 4-active-arm bridge, using thick-film strain gages in a hermetically sealed chamber (except gage units) Operating Temp Range: -46 to 121°C (-50 to 250°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Span: 0.003% FSO/°F Zero: 0.003% FSO/°F Proof Pressure: 150% of rated pressure Burst Pressure: 300% of rated pressure Wetted Parts: 17-4 PH stainless steel Pressure Port: Ranges <10000 psi: 7.16-20 UNF female; also available: 1.4-18 NPT M/F; ranges 10,000 to 30,000 psi = 9/16-18, 1.4" HP tube Electrical Connection: PTIH-10-6P or equal. Also available: 3 m (10') 2-conductor cable; explosionproof amplifier housing. Mating Connector: PT06F10-6S (not included), metric ranges available Weight: 388 g (13.7 oz)
All dollar amounts on this site are shown in Canadian currency.Note:(1) 2 and 5 psi Ranges available only on amplified output. (2) 1/4 HP Tube Fitting supplied for ranges 10,000 psi and above. (3)All Gage Pressure ranges are also available in Sealed Gage Pressure. Ordering Example: (1) PT06F10-6S Mating connector (sold separately), CAD35.00 plus (1) PX01K1-1KGI 1,000 psi gage transducer with 4-20 mA output, twist lock connector and 7 / 16 -20 female pressure connection,, CAD1,150.00, CAD35.00 + 1,150.00 = CAD1,185.00
Part Number Builder
Build Your Part Number Below
Pressure Fitting select from: C for 1/4-18 NPT-M D for 1/4-18 NPT-F J for 7/16-20 UNF-M K for 7/16-20 UNF-F S for 1/4 HP Tube Fitting
Electrical Termination select from: 0 for 10 foot cable 1 for PT1H-10-6P connector (mating connector sold separately) 5 for Lightening protected amplifier box (4-20 ma only)
Pressure Range (PSI) select from: 002 for 0-2 psi 005 for 0-5 psi 010 for 0-10 psi 015 for 0-15 psi 020 for 0-20 psi 025 for 0-25 psi 050 for 0-50 psi 075 for 0-75 psi 100 for 0-100 psi 150 for 0-150 psi 200 for 0-200 psi 250 for 0-250 psi 300 for 0-300 psi 500 for 0-500 psi 750 for 0-750 psi 1K for 0-1000 psi 1.5K for 0-1500 psi 2K for 0-2000 psi 3K for 0-3000 psi 3.5K for 0-3500 psi 5K for 0-5000 psi 7.5K for 0-7500 psi 10K for 0-10000 psi 20K for 0-20000 psi 30K for 0-30000 psi
Units select from: A for Absolute Pressure G for Gage Pressure S for Sealed Gage Pressure
Output select from: V for mV/V Output 5T for 0-5 Volt Output 5Z for Isolated 0-5 Volt Output 10T for 0-10 Volt Output I for 4-20 mA Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.