OMEGA's PX01 is a very-highaccuracy,
industrial pressure transducer.
The all stainless steel construction
and hermetically sealed case make
it suitable for harsh environments.
The PX01 has
a high operating range, a broad
compensated range, and excellent
temperature compensation that gives
stable readings in harsh applications.
It is available in gage, sealed, or
absolute models as well as psi or
metric ranges. NPT or 7.16-20 O-ring
pressure fittings are available, as are
connector or cable electrical
The PX01 is now available with a high speed (up to 1000 rdgs/sec)in-line USB amplifier. Add Suffix -IN-USBH. See Part Number builder below for pricing.
SPECIFICATIONS mV/V Output
Excitation: 10 Vdc (15 Vdc max) Output: 3 mV/V ±0.25% Input Resistance: 350 ±10 Ω Output Resistance: 350 ±10 Ω Zero Balance: 1.0% FS Linearity: ±0.05% FS Hysteresis: ±0.05% FS Repeatability: ±0.05% FS Shunt Calibration: Value specified on calibration sheet Sensing Element: 4-active-arm bridge, using thick-film strain gages in a hermetically sealed chamber Operating Temp Range: -73 to 163°C (-100 to 325°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Span: 0.0015% rdg/°F Zero: 0.0015% FS/°F Proof Pressure: 150% of rated pressure Burst Pressure: 300% of rated pressure Wetted Parts: 17-4 PH SS Pressure Port: Ranges <10,000 psi: style K: 7/16-20 UNF female; style C: 1/4 NPT male;
ranges ≥10,000 psi: style S: 1/4" HP tube Also Available: 1/4-18 NPT female or 7/16-20 UNF male Electrical Connection: Style "1": PT1H-10-6P or equal Style "0": 3 m (10') cable Mating Connector: PT06F10-6S (not included) Weight: 255 g (9 oz)
The PX01 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-700 mbar to 0-400 bar pressure ranges.
Please see the PXM01 for complete details, or contact our Pressure department for more information..
All dollar amounts on this site are shown in Canadian currency.Note:(1) 2 and 5 psi Ranges available only on amplified output. (2) 1/4 HP Tube Fitting supplied for ranges 10,000 psi and above. (3)All Gage Pressure Ranges also available in Sealed Gage Pressure. Ordering Example: (1) PT06F10-6S mating connector (sold separately), CAD35.00 plus (1) PX01C1-500GV is a 0-500 PSIG transducer with mV/V output, 1/4-18 NPTM fitting, and a PT1H-10-6P connector, CAD920.00, CAD35.00 + 920.00 = CAD955.00
Part Number Builder
Build Your Part Number Below
Pressure Fitting select from: C for 1/4-18 NPT-M D for 1/4-18 NPT-F J for 7/16-20 UNF-M K for 7/16-20 UNF-F S for 1/4 HP Tube Fitting
Electrical Termination select from: 0 for 10 foot cable 1 for PT1H-10-6P connector (mating connector sold separately) 5 for lightening protected amplifier box (4-20 ma only)
Pressure Range (PSI) select from: 002 for 0-2 psi 005 for 0-5 psi 010 for 0-10 psi 015 for 0-15 psi 020 for 0-20 psi 025 for 0-25 psi 050 for 0-50 psi 075 for 0-75 psi 100 for 0-100 psi 150 for 0-150 psi 200 for 0-200 psi 250 for 0-250 psi 300 for 0-300 psi 500 for 0-500 psi 750 for 0-750 psi 1K for 0-1000 psi 1.5K for 0-1500 psi 2K for 0-2000 psi 3K for 0-3000 psi 3.5K for 0-3500 psi 5K for 0-5000 psi 7.5K for 0-7500 psi 10K for 0-10000 psi 20K for 0-20000 psi 30K for 0-30000 psi
Units select from: A for Absolute Pressure G for Gage Pressure S for Sealed Gage Pressure
Output select from: V for mV/V Output 5T for 0-5 Volt Output 5Z for Isolated 0-5 Volt Output 10T for 0-10 Volt Output I for 4-20 mA Output
In Line USB Amplifier for mV Models select from: Nothing(leave field blank) for none -IN-USBH for In Line USB amplifier
Note: All combinations may not be valid, check spec sheet for valid part numbers.