Note: This model is being phased out and will be on a build to order basis. There is a newer fast sampling version of this product. Please see the PX409-USBH as a possible alternative. The software at this time is not backward compatible so please contact our Pressure Engineering department if you have the older unit and want to discuss the newer model.
This Series connects directly to your computer. Free software
makes data logging and charting your readings a simple task. Free drivers are also available for download for many popular Laboratory programs. The USB output is compatible with USB 2.0 and lower systems. The micromachined silicon design are ideal for pressure or level applications in laboratory, test platforms, or bio/pharmaceutical applications as well as industrial applications that require a rugged, high accuracy transducer. The micro-machined silicon sensor provides a very stable transducer with exceptional high accuracy of ±0.08% Typ. and a broad compensated range of ranges >5 psi of -29 to 85°C (-20 to 185°F). The modular construction allows for fast delivery of most configurations and fittings. Delivery is typically stock to 1 week!
Note: Their is a newer fast sampling version of the PX409-xxx-USB designated the PX409-xxx-USBH.
USB TRANSDUCER SPECIFICATIONS
Accuracy: ±0.08 BSL Typical, (linearity, hysteresis and repeatability combined) ±0.14% BSL maximum Output: USB 2.0 and below compatible Operating Temperature Range: -40 to 85°C (-40 to 185°F) Compensated Temperature Range: Ranges >5 psi: -29 to 85°C (-20 to 185°F) Ranges ≤5 psi: -17 to 85°C (0 to 185°F) Temperature Compensation Over Compensated Range: Span and Zero: Ranges ≤5 psi: ±1%, Ranges >5 psi ±0.5% Minimum Isolation Between Case and Output Terminations: 100 MΩ@ 50 Vdc Pressure Cycles: 1 million, minimum Long Term Stability (1-Year): ±0.1% FS typical A to D Conversion: 14-Bit Shock: 50g, 11 mS half sine shock, vertical and horizontal axis Vibration: 5-2000-5 Hz 30 minute cycle, Curve L Mil-Spec 810 figure 514-2-2, horizontal and vertical axis Bandwidth: DC to 3 Hz typical CE Compliant: Meets industrial emissions and immunity standard EN61326 Environmental Protection: IP65 Secondary Containment: Vacuum and Gage Pressure 10 inH2O to 5 psi: to 1000 psi 15 to 1000 psi: to 3000 psi 1500 to 5000 psi: to 15,000 psi Absolute Pressure
5 to 1000 psi: to 6000 psi 1500 to 5000 psi: to 15,000 psi Wetted Parts: 316L SS Weight: 200 g (7 oz) Overpressure Gage Pressure: 10 inH2O: 10 times span 1 psi: 6 times span 2.5 psi to 3500 psi: 4 times span 5000 psi: 15,000 psi max Overpressure Absolute Pressure: 5 psia: 6 times span 15 psia to 3500 psia: 4 times span 5000 psia: 15,000 psi max
All dollar amounts on this site are shown in Canadian currency.Note: Each unit comes complete with NIST traceable 5-point calibration certificate, data logging/charting software, and operator's manual. Ordering Example: (1) PX409-10WGUSBH USB output pressure transducer, 10 inH2O gage pressure range, 2 m (6 ft) cable with USB connector, CAD790.00
Part Number Builder
Build Your Part Number Below
Pressure Range (PSI) select from: -10W for 10"H2O -001 for 0-1 psi -2.5 for 0-2.5 psi -005 for 0-5 psi -015 for 0-15 psi -030 for 0-30 psi -050 for 0-50 psi -075 for 0-75 psi -100 for 0-100 psi -150 for 0-150 psi -250 for 0-250 psi -500 for 0-500 psi -750 for 0-750 psi -1.0K for 0-1000 psi -1.5K for 0-1500 psi -2.5K for 0-2500 psi -3.5K for 0-3500 psi -5.0K for 0-5000 psi
-16 for 16 to 32 inHg (Barometric only) -26 for 26 to 32 inHg (Barometric only) -32 for 0 to 32 inHg (Barometric only)
Units select from: G for Gage Pressure A for Absolute Pressure (5 to 5000 psi ranges) V for Gage Vacuum (-10 inH2O to -15 psi only) CG for Compound Gage (± 10 inH2O to ± 15 psi only) B for Barometric Ranges
Output select from: USB for USB Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.