All of OMEGA’s RTD elements can be supplied with additional lead wire attached to existing leads. Longer leads create more flexibility for use in many RTD probe sensor applications. The size of the potted junction between lead wire and element is kept as small as possible. Note: These elements are not intended for direct immersion into liquids. Configurations below reflect 36" lead wire, Style-2 (3 Wire).
All dollar amounts on this site are shown in Canadian currency.Note: These elements are not intended for direct immersion into liquids. Style 2 is standard wire configuration. To order style 1 (2-wire), replace the “-2-” with “-1-”in the model number. To order style 3 (4-wire), replace the “-2-” with “-3-” in the model number. For leads over 36", change the “36” in the model number to length desired in inches and add $2.25/ft (Styles 2 & 3) or $1.40/ft (Style 1). Other RTD elements are also available with lead wire attached see others in the RTD-(*) series or consult Sales for availability and pricing. Terminations available: “-LUG”, add $4.50. For miniature connectors, use suffix “-MTP” or “-OTP” for standard size connectors, and add $7. (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) RTD-2-F3105-36-T F3105 element with 36, CAD69.00
Part Number Builder
Build Your Part Number Below
Wires Configuration select from: 2 for Standard 3 wires configuration 1 for 2 Wires Configuration 3 for 4 Wires Configuration
RTD Element Type select from: F3105 for Thin film Pt100 RTD element F3102 for Thin film Pt100 RTD element 1PT100KN2515 for Pt100 wire wound element 1PT100KN2528 for Pt100 wire wound element F3145 for Thin film Pt1000 RTD element F3142 for Thin film Pt1000 RTD element
Insulation Type select from: G for Fiberglass Insulated T for PFA insulated cable B for Bare (No insulation)
Additional Options select from: Nothing(leave field blank) for None -LUG for Spade style terminal lugs standard termination in stripped leads -OTP for Connectors (3-wire only) -MTP for Miniature connector
Note: All combinations may not be valid, check spec sheet for valid part numbers.