RTD Single Sensor This RTD plug sensor is ideal for pressure vessel applications, pressurized containers and applications requiring a temperature sensor with an NPT mounting fitting. The single element design has a 1/4" diameter, 304 stainless steel probe that extends 1/2" from a 1/4"NPT mounting thread (optional 1/8"NPT mounting thread also available). Leads are 6' long, stranded #26 AWG nickel plated copper, PFA-insulated & jacketed with steel overbraid. Sensors are supplied with or without subminiature connectors. Pressure rating is 2500 psi., and the maximum temperature rating is 230°C (445°F).
RTD Dual Element Sensor Dual RTD pipe plug probes come standard with flush sensing surfaces which minimize interference with moving parts, and 1/8"NPT mounting threads (optional 1/4"NPT mounting threads also available). The leads are 6' long, stranded #26AWG nickel plated copper, PFA insulated & jacketed cables with miniature connectors on each cable.
For complete product specifications see the Related Links section at the bottom of this page.
All dollar amounts on this site are shown in Canadian currency.Ordering Example: (1) RTD-NPT-72-E RTD Pipe Plug Probe, 72 inch leads and, CAD95.00
Part Number Builder
Build Your Part Number Below
RTD Dual Element Sensor select from: Nothing(leave field blank) for None -DUAL for Dual 100 U Class A DIN Platinum thin-film elements
Thread Size select from: 1/4 for 1/4 NPT 1/8 for 1/8 NPT
Termination Options select from: -TA3F for Audio Connector -OTP for OTP Connector -MTP for MTP Connector Nothing(leave field blank) for Stripped Leads
Temperature Range select from: -HT for 480ºC max Nothing(leave field blank) for 230ºC max
Cable Options select from: Nothing(leave field blank) for None -S for Steel Overbraid for -DUAL only
Note: All combinations may not be valid, check spec sheet for valid part numbers.