The SV-330 Series has been discontinued. Please contact our Flow Engineering Department for possible alternatives.
SV-330 Series 2-way solenoid
valves are direct-acting, featuring an
epoxy-encapsulated coil, a brass or
stainless steel body, and Viton® seal
material. The -10 to 130°C (14 to 266°F)
temperature range is ideal for
neutral media such as compressed
air, water, oils, and greases without
additives (viscosity of approximately
2.3 x 10-4 ft2/s). Electrical connection
is by conduit plug.
SPECIFICATIONS Mounting Position: Any (preferably with solenoid system upright) Max Ambient Temp: 54°C (129°F) Voltage Tolerance: ±10% Power Consumption in Warm State: 35 to 40 VA (inrush), 16 VA/10 W (hold) Opening Time:10 to 20 ms Closing Time: 20 to 30 ms Times measured at outlet A on energizing/ de-energizing until attainment of pressure rise to 90%/pressure drop to 10% at a working pressure of 85 psi. Cycling Rate: Approx. 1000 cpm Duty Cycle: Continuous (100%)
All dollar amounts on this site are shown in Canadian currency.Note: