This general purpose thermistor probe has a stainless steel sheath
sealed at the tip for direct immersion into process liquids. The straight
sheath design, with 40 inches of extension cable, adapts well to use with
a wide variety of transition fittings. This design makes for a more compact
probe when space limitations are a factor. For a straight sheath with
strain relief spring and transition, see the TJ36-44000 series probe.
Thermistor resistances of 5,000 and 10,000 ohms are standard with 2,252,
3,000 and 30,000 ohm resistances available. Standard interchangeability
is ±0.2°C, with an optional interchangeability of ±0.1°C available.
All dollar amounts on this site are shown in Canadian currency.Note:Options: For longer lengths, change model number to length required in inches and add $0.50 per inch to the price. Standard cable length is 40 inches, for longer lengths change model number to the length required in inches and add $0.95 for foot to the price. For a phone plug connector, add "PP" to the model number and add $7 to the price. Optional resistances of 2252, 3000 and 30000 ohms and an interchangability of ±0.1°C are available.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) TH-10-44006-3/16-2-40 3/16, CAD50.00
Part Number Builder
Build Your Part Number Below
Thermistor Element select from: 44007 for 5000 ohms 44006 for 10000 ohms
Diameter select from: 1/8 for 1/8 inch 3/16 for 3/16 inch 1/4 for 1/4 inch M4.5 for 4.5 mm M6 for 6 mm
Probe Length select from: 2 for 2 inches 4 for 4 inches 50 for 50 mm on metric dia 100 for 100mm on metric dia
Lead Length select from: 40 for 40 inches 80 for 80 inches 1 for 1m on metric dia 2 for 2m on metric dia.
Note: All combinations may not be valid, check spec sheet for valid part numbers.