Omega's new Wireless Industrial Thermocouple and RTD Probe Assemblies feature a complete, ready to install, pre-wired sensor and wireless transmitter package. Each battery powered wireless unit will transmit measurement back to a host receiver up to 120 m (400') away. Each unit comes pre-programmed to operate as a Type J, K, T, E, R,S, B, N or C thermocouple or RTD. When activated the unit will transmit readings continuously at pre-set time intervals that has been programmed by the user during the initial setup and installation. Each unit measures and transmits: process temperature, ambient temperature, wireless link signal strength and battery condition to the host and is displayed on the PC screen in real time using the provided free software. SPECIFICATIONS Thermocouple (TC) Models Available Types: J, K, T, E, R, S, B, C or N Thermocouple Measurement Range: J: -100 to 760°C (-148 to 1400°F) K: -100 to 1260°C (-148 to 2300°F) T: -200 to 400°C (-328 to 752°F) E: -200 to 1000°C (-328 to 1832°F) R: 260 to 1760°C (500 to 3200°F) S: 260 to 1760°C (500 to 3200°F) B: 870 to 1820°C (1598 to 3308°F) C: 0 to 2315°C (32 to 4200°F) N: -100 to 1260°C (-148 to 2300°F) TC Measurement Accuracy: Type J, K: ±0.5% of reading or ±1.0°C (1.8°F), whichever is greater Type T, E, N: ±0.5% of reading or ±2.0°C (3.6°F), whichever is greater Type R, S, B, C: ±0.5% of full scale TC Measurement Resolution: 1°C/1°F: Type J, K, T, E, N, 0.5°C: Type R, S, B, C Cold Junction Compensation (Automatic): -10 to 70°C (14 to 158°F) Resistive Temperature Device (RTD) models Available Types: 100 Ω (standard), 500 Ω , 1000 Ω (special order) Battery Life (Typical): 3 years (1 sample/minute reading rate @ 25°C (77°F))
Note: Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe(please note CE compliance of the specific model for use in Europe).
All dollar amounts on this site are shown in Canadian currency.Note: Comes with one 3.6 V lithium battery, programming software, measurement and logging software, mounting bracket, type K beaded wire thermocouple, and user manual.
Part Number Builder
Build Your Part Number Below
Model Type select from: TC for Thermocouple RTD for RTD
Input Type and Sheath Material select from: ICIN for Thermocouple Type J Inconel ICSS for Thermocouple Type J 304 SS CAIN for Thermocouple Type K Inconel CASS for Thermocouple Type K 304 SS CXIN for Thermocouple Type E Inconel CXSS for Thermocouple Type E 304 SS CPIN for Thermocouple Type T Inconel CPSS for Thermocouple Type T 304 SS NNIN for Thermocouple Type N Inconel 1PT304 for RTD Pt100 0.00385 Ohm 304 SS 1PT316 for RTD Pt100 0.00385 Ohm 316 SS 2PT304 for RTD Pt100 0.00392 Ohm 304 SS 2PT316 for RTD Pt100 0.00392 Ohm 316 SS
Sheath Diameter select from: 116 for 1/16 Inch 18 for 1/8 Inch 316 for 3/16 Inch 14 for 1/4 Inch
Junction Type select from: Nothing(leave field blank) for RTD Model U for Ungrounded (Thermocouple Model)
Probe Length select from: 6 for 6 Inch 12 for 12 Inch 18 for 18 Inch 24 for 24 Inch
Note: All combinations may not be valid, check spec sheet for valid part numbers.