Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 
Canada1-888-826-6342
International514-856-6928

Your Source for Process Measurement & Control

STANDARD TERMINAL BLOCK RELAYS

XRU1D Series

STANDARD TERMINAL BLOCK RELAYS | XRU1D Series

STANDARD TERMINAL BLOCK RELAYS

CAD20.75 XRU1D24

CE
  • Pluggable Relay Allows for Field Replacement
  • Functional Plug-In Bridges
  • Screw Connections
  • LED Status Indication
  • DIN Rail Mount
  • Only 6.2 mm (0.24") Wide
  • All Common Input Voltages Between 24 Vdc to 120 Vac
  • NEMA 6 (IP67) Protection
  • Environmentally Friendly, Cadmium-Free Contact
  • Easy, Cost-Effective and Replacement Using Engagement Lever
Relays and Timers - View related products

Description

Application Description
Used in automation systems, electromechanical relays guarantee a safe connection between process I/O and electronic controls. The following functions are covered by relay coupling elements:
• Electrical isolation between the input and output circuits
• Independence of the type of switching current (AC and DC)
• High short-term overload resistance in the event of short circuits or voltage peaks
• Low switching losses
• Ease of operation

Accessories
Power Terminal Block
The XRAPLCESK power terminal block has the same shape as the relay modules and is used to feed in the bridging potentials. The nominal current is 32 A. When the total current is less than or equal to 6 A, supply can take place directly at the connecting terminal blocks of one of the connected relays.

End Cover
The XRAATPBK end cover is required at the start and stop of a relay strip. It can also be used for visual separation of groups of relays as well as separating relays with voltages greater than 250V and separating neighboring bridges with different potentials. It is equipped with pre-scored break out points at the bridging positions so that individual bridges can be passed through as needed. It may also be necessary to use the end cover between adjacent relays when three phases (L1, L2, L3) are used on the contact side of the relay.

Bridges
The XRAFBST colored, insulated plugin bridge system reduces wiring time by up to 70% compared to conventionally wired relays. The XRAFBST2, 2-position bridges, are suited for bridging a smaller number of relays and total currents <6 A. When a circuit is supplied from both sides, the circuit can be opened at any point, allowing all other modules to continue being supplied at the same time. The XRAFBST500 allow up to 80 modules to be bridged at one time. If bridges with different potentials meet in neighboring modules, the end cover XRAATPBK should be used. All bridges are equipped with a groove for removal with a standard screwdriver.

SPECIFICATIONS
Input Voltage:
   XRU1D24: 24 Vdc
   XRU1D24U: 24 Vac/Vdc
   XRU1D120U: 120 Vac/110 Vdc
Typical Input Current:
   XRU1D24: 9 mA
   XRU1D24U: 11 mA (24 Vac), 8.5 mA (24 Vdc)
   XRU1D120U: 3.5 mA (120 Vac), 3 mA (110 Vdc)
Connection Type: Screw connection
Rigid Solid AWG (mm2): 26 to 14 (0.14 to 2.5)
Flexible Stranded AWG (mm2): 26 to 14 (0.14 to 2.5)
Typical Response Time:
   XRU1D24: 5 mS
   XRU1D24U and XRU1D120U: 6 mS
Typical Release Time:
   XRU1D24: 8 mS
   XRU1D24U and XRU1D120U: 15 mS
Input Protection:
   XRU1D24: Polarity protection diode, free-wheeling diode
   XRU1D24U and XRU1D120U: Bridge rectifier
Contact Type: SPDT
Contact Material: AgSnO
Max Switching Voltage: 250 Vac/Vdc1
Min Switching Voltage: 12 Vac/Vdc
Limiting Continuous Current: 6 A
Min Switching Current: 10 mA
Min Switching Power: 120 mW
Ambient Temp Range: -20 to 60°C (-4 to 140°F)
Rated Operating Mode: 100% operating factor
Inflammability Class: V0, in accordance with UL 94
Mechanical Service Life: 2 x 107 cycles
*The separating plate, XRAPLCESK, should be installed for voltages greater than 250V (L1, L2, L3) between identical terminal points of adjacent modules. Potential bridging is then possible with the XRAFBST bridge system.
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.
Qty
Description
Click to expand/minimize a list of what others bought with theXRU1D120U
XRU1D120U Star
CAD27.50
Availability: In Stock
 
SPDT relay, 120 Vac/110 Vdc coil voltage
Click to expand/minimize a list of what others bought with theXRU1D24
XRU1D24 Star
CAD20.75
Availability: In Stock
 
SPDT relay, 24 Vdc coil coltage
  
XRU1D24U Star
CAD23.75
Availability: 1 week
 
SPDT relay, 24 Vac/Vdc coil voltage
REPLACEMENT RELAYS AND ACCESSORIES
  
XRR1D120U Star
CAD16.50
Availability: 1 week
 
Replacement relay for XRU1D120U
  
XRR1D24 Star
CAD10.75
Availability: 1 week
 
Replacement relay for XRU1D24 and XRU1D24U
  
XRAPLCESK Star
CAD26.50
Availability: 1 week
 
Power terminal block
  
XRAATPBK Star
CAD2.20
Availability: 1 week
 
Black end cover
  
XRAFBST2RD Star
CAD1.50
Availability: 1 week
 
2-position red snap in jumper
  
XRAFBST2BU Star
CAD1.50
Availability: 1 week
 
2-position blue snap in jumper
  
XRAFBST2GY Star
CAD1.50
Availability: 4 weeks
 
2-position gray snap in jumper
  
XRAFBST500RD Star
CAD23.25
Availability: 4 weeks
 
80-position red snap in jumper
  
XRAFBST500BU Star
CAD23.25
Availability: 4 weeks
 
80-position blue snap in jumper
  
XRAFBST500GY Star
CAD23.25
Availability: 1 week
 
80-position gray snap in jumper
  
XBMZB6 Star
CAD0.65
Availability: 1 week
 
6.2 mm white blank marker strip
  
XBANS3575P Star
CAD12.75
Availability: 1 week
 
DIN rail, 35mm x 7.5mm x 2m, slotted
  
XBANS3575U Star
CAD12.75
Availability: 1 week
 
DIN rail, 35mm x 7.5mm x 2m, solid
Click to expand/minimize a list of what others bought with theXBANS3515P
XBANS3515P Star
CAD23.50
Availability: 1 week
 
DIN rail, 35mm x 15mm x 2m, slotted
  
XBANS3515U Star
CAD23.50
Availability: 1 week
 
DIN rail, 35mm x 15mm x 2m, solid
  
XBANS3575PL Star
CAD21.25
Availability: 1 week
 
DIN rail, 35mm x 7.5mm x 2m, slotted, aluminum
All dollar amounts on this site are shown in Canadian currency. Ordering Example: (1) XRU1D120U SPDT relay, 120 Vac/110 Vdc coil voltage, CAD27.50