Low Viscosity, corrosion-Resistant Drum PumpsOpen Drip-Proof, 1/2 HP 115 Vac 1 Phase Drum Pump
Please add to cart to keep it or exit the configuration
- Rugged Industrial Construction
- Wide Variety of Available Motors
- Pump Tubes and Motors Supplied Separately for Maximum Flexibility
- Corrosion-Resistant Polypropylene or 316SS Materials
- Sealless Pump Tubes for Leak-Proof Operation
FPUD311-A Model OptionsView all models
Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Both the FPUD311 and FPUD321 electric motors are open drip-proof (ODP), while the FPUD362 is a totally enclosed fan-cooled (TEFC) motor.
All three AC motors are thermaloverload protected with a manual reset, and all three include internal cooling fan, built-in on/off switch, 3.6 m (12'), three-wire cord; both 115 Vac motors include a grounded wall plug.
The air operated unit has a ¼ MNPT fitting for hooking up to a customersupplied air hose, and includes a flow-regulating valve and muffler. An optional air lubricator/filter assembly is also available.
When pumping flammable or combustible materials, or for work in explosive environments use the FPUD331 air motor with a stainless steel tube.
FPUD3-P Series tubes include a variable orifice on the outlet to limit flows to 10, 20, 30, or 40 GPM. Refer to the performance curve graphs on next page for flow rate vs. discharge head data, and flow rate vs time for the rechargeable battery model. All FPUD3 Series pump tubes are sealless to insure leakproof operation. See tubing products in section T.
Pump Tube Wetted Parts:
FPUD3-P: Polypropylene, Inconel, and PTFE
FPUD3-S: 316SS, PTFE, and Halar
Pump Tube Operating Temperature:
Polypropylene: 71.1°C (160°F);
316SS: 104°C (220°F) Electric and Air Motors
Pump Capability: 40 gpm, 24 m (80') TDH, 30-minute run-dry; air 30 gpm, 18 m (60') HD
Pump Capability: 9 gpm, 4' TDH
Max Fluid Viscosity: 100 cps, 1.6 specific gravity
CAUTION: DO NOT USE THE FMXD11-AM AIR MOTOR WITHOUT THE FPUD34-SK STATIC PROTECTION KIT