en
Save Configuration
text.skipToContent text.skipToNavigation
Configure Product
Saved Configuration
View Configuration

Laboratory-Grade Benchtop Closed Loop Wind Tunnel

Item# WT-3115

Laboratory-Grade Benchtop Closed Loop Wind Tunnel Laboratory-Grade Benchtop Closed Loop Wind Tunnel

Description

The WT-3115 is a research-qualityclosed loop wind tunnel thatprovides a convenient, accuratesystem for thermally characterizingPCBs and individual components atelevated temperatures from ambientto 85°C (185ºF).The WT-3115 wind tunnel producesair flows up to 5 m/s (1000 ft/min).With customization, it can generateflows up to 50 m/s (10,000 ft/min)using orifice plates (availableoptionally). The clear polycarbonatetest section lets the user view thetest specimen and allows forflow visualization.Unlike open loop wind tunnels, theWT-3115 recirculates internal air.This allows the system heater torapidly warm the air to a specifictemperature. The testing of boardsand components in hot air is arequirement in some NEBS andother standards. The precisecontrols and temperature rangeof the WT-3115 wind tunnel allowsits use for testing heat sinkperformance and for calibratingair and temperature sensorsThe complete wind tunnel fits onmost lab benches and is poweredfrom standard AC outlets. It has asmaller footprint than traditional,closed loop wind tunnels orenvironmental test chambers.The WT-3115 is provided with acontroller for controlling the flow andtemperature in the wind tunnel. Thecontroller comes with a graphicaluser interface to automate the windtunnel operation.The WT-3115 test section can beaccessed from the top door or sidesfor mounting and repositioning ofboards, components and sensors.Internal rail guides provide an easymechanism to install test specimensof different sizes (e.g., PCB,heat sink).Instrument ports (6) are providedin the side walls of the test sectionfor placing temperature andvelocity sensors such asthermocouples, pitot tubesand hot-wire anemometers.
WT-3115
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 1501ms
  • REVIEWS, PRODUCT
  • bvseo-msg: Execution timed out, exceeded 1,500ms;
  • Quick Access Panel
  • Sensor Ports (6)
  • Wind Tunnel Controller
  • High Quality Flow, Low Turbulence
  • Applications
  • High Temperature Testing
  • Heat Sink Characterization
  • Sensor Calibration
  • Component Testing
  • Aerodynamic and Pressure Drop Measurement
  • Multiple Pcb Testing
Supply Voltage
Weight
Quantity Price each
1-4 C$60,850.00
5-10 C$57,199.00
11-24 C$55,982.00
25-49 C$52,331.00
50-99 C$51,722.50
100+ C$49,897.00

0 In Stock

Lead Time: 13 weeks

Product Specs

  • Flow Accuracy ±2%
  • Flow Rate 0 to 5 m/s (0 to 1000 ft/min)
  • Flow Uniformity ±1%
  • Power Source 20 Amps
  • Number of Ports 6
  • Test Chamber Dimensions 77.6 L x 26 W x 11.6 cm H (30.5 x 10.2 x 4.5")

Description

The WT-3115 is a research-qualityclosed loop wind tunnel thatprovides a convenient, accuratesystem for thermally characterizingPCBs and individual components atelevated temperatures from ambientto 85°C (185ºF).The WT-3115 wind tunnel producesair flows up to 5 m/s (1000 ft/min).With customization, it can generateflows up to 50 m/s (10,000 ft/min)using orifice plates (availableoptionally). The clear polycarbonatetest section lets the user view thetest specimen and allows forflow visualization.Unlike open loop wind tunnels, theWT-3115 recirculates internal air.This allows the system heater torapidly warm the air to a specifictemperature. The testing of boardsand components in hot air is arequirement in some NEBS andother standards. The precisecontrols and temperature rangeof the WT-3115 wind tunnel allowsits use for testing heat sinkperformance and for calibratingair and temperature sensorsThe complete wind tunnel fits onmost lab benches and is poweredfrom standard AC outlets. It has asmaller footprint than traditional,closed loop wind tunnels orenvironmental test chambers.The WT-3115 is provided with acontroller for controlling the flow andtemperature in the wind tunnel. Thecontroller comes with a graphicaluser interface to automate the windtunnel operation.The WT-3115 test section can beaccessed from the top door or sidesfor mounting and repositioning ofboards, components and sensors.Internal rail guides provide an easymechanism to install test specimensof different sizes (e.g., PCB,heat sink).Instrument ports (6) are providedin the side walls of the test sectionfor placing temperature andvelocity sensors such asthermocouples, pitot tubesand hot-wire anemometers.

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 1500ms
  • REVIEWS, PRODUCT
  • bvseo-msg: Execution timed out, exceeded 1,500ms;
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 1500ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: Execution timed out, exceeded 1,500ms;