MultiFunction Meter for Batch Control, Rate Indication & TotalizationMultiFunction Meter for Batch Control, Rate Indication and Totalization
Please add to cart to keep it or exit the configuration
- 5 Year Warranty
- Frequency Ratemeter
- Frequency Ratio
- Up or Down Totalizer/ Batch Controller
- RS-232C and HI, LO and GO Open-Collector Outputs Standard
- Analog Output for Rate or Total (Optional)
DPF5300-10/32VDC Model OptionsView all models
Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
DescriptionStarting from Apr 19th 2018, DPF5100 rate meter has been discontinued. Looking for a possible substitute, please contact your local customer engineering for details.
The DPF5100 microprocessor-based, 6-digit, 1 /8 DIN panel instrument can be configured by front-panel keys or by a personal computer as a frequency meter/ tachometer, frequency-ratio meter, period/ period-average meter, time-interval/ time-interval-average meter, reset stopwatch, and cumulative timer or totalizer/1-stage batch controller. However, the DPF5100 display cannot toggle between rate and total. Two signal inputs can be used to provide frequency ratio or time-interval measurements.
Five Operating Modes
In the frequency meter, the minimum display update rate is equal to 1 period of the frequency input. Thus, very low frequency measurements are displayed and updated faster than most conventional frequency meters. Only two sensors are required to measure the rate of a moving object. The DPF5100 can be set up as frequency-ratio meter, ideal for monitoring flow ratios. The DPF5100 can be set up as an up or down totalizer/1-stage batch controller at rates up to 7 MHz. The display capacity is –99,999 to 999,999 counts with exponential format up to 9.99 E9. Upon ac power loss, the latest reading is automatically saved in non-volatile RAM and is restored upon return of power.