Call us at 1-888-826-6342
Six Channel Handheld Rechargeable Temperature Data Logger
Six Channel Handheld Temperature Data Logger and Built-In Rechargeable Battery
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$896.59 |
| 5-9 | C$851.76 |
| 10-24 | C$833.83 |
| 25-49 | C$797.97 |
| 50-99 | C$780.03 |
| 100+ | C$762.10 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Four Thermocouple Inputs and Two Pt100 RTD Inputs
- Display and Log All 6 Channels Simultaneously or Individually
- USB Interface with Free Software
- MODBUS Protocol for Integration Into 3rd Party Software
RDXL6SD-USB Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Additional Feature
Measurement Type
Number of Measurements
Input Type
Maximum Samples
Display
Power
Data Interface
Max Sampling Rate
The RDXL6SD-USB is a six-channel touch screen data logger that accepts four thermocouple and two RTD inputs. Each channel has individually configurable HI/LO alarms. The intuitive touch screen interface allows each channel to be configured separately for input type, math, alarm, and display options. All six channels can be displayed and logged simultaneously or individually. Data can be logged as fast as once a second and is stored on the included 4 GB SD card in Excel compatible format.
Specifications
Inputs: 4x thermocouple inputs for use with miniature thermocouple connectors, and 2 x spring clamp terminals for 2 or 3-wire RTDs, 28 to 16 AWG
Input Temperature Range:
Type J: -200 to 1200°C
Type K: -200 to 1372°C
Type T: -200 to 400°C
Type R: 0 to 1768°C
Type S: 0 to 1768°C
Type N: 0 to 1300°C
Type E: -200 to 1000°C
RTD: -200 to 850°C
Temperature Accuracy:
For Thermocouples: ±0.1% or 0.8°C
For RTD: ±1.0% or 1.0°C
Temperature Resolution: 0.1° for temperatures below 1000°C or °F, 1° for temperatures above 1000°C or °F
Display: 72 mm (2.83") resistive touch TFT, 320 x 240 pixels, backlit
Configurable Parameters: Temperature units, alarms, signal processing, date and time, data logging, power options, graph channels
Temperature Units: °F or °C
Alarm Configuration: 12 x alarms (2 per channel) with adjustable level, individually configurable as HI or LO
Signal Processing: Average, minimum, maximum, standard deviation, 2-channel temperature difference
Display Response Time: 1 second
Operating Temperature: 0 to 50°C (32 to 122°F)
Power Supplies: Built-in rechargeable battery, USB, or 5 Vdc adaptor (included)
Battery Life: 32 hour logging with full display brightness; up to 96 hours while logging in power saving mode
Weight: 200 g (7 oz) without thermocouples
Dimensions: 136 W x 71 H x 32 D mm (5.35 x 2.8 x 1.25")
Data Logging Specifications
Data Logging Interval: 1 to 86,400 seconds (1 day)
Maximum SD Card Capacity: 32 GB SD Card (4 GB included)
Variables Logged: Measured temperature, cold junction temperature, alarm events
File Format: .csv (can be imported to Excel)
Configurable Parameters: Sample period, number of samples, scheduled start date and time
Specifications
Inputs: 4x thermocouple inputs for use with miniature thermocouple connectors, and 2 x spring clamp terminals for 2 or 3-wire RTDs, 28 to 16 AWG
Input Temperature Range:
Type J: -200 to 1200°C
Type K: -200 to 1372°C
Type T: -200 to 400°C
Type R: 0 to 1768°C
Type S: 0 to 1768°C
Type N: 0 to 1300°C
Type E: -200 to 1000°C
RTD: -200 to 850°C
Temperature Accuracy:
For Thermocouples: ±0.1% or 0.8°C
For RTD: ±1.0% or 1.0°C
Temperature Resolution: 0.1° for temperatures below 1000°C or °F, 1° for temperatures above 1000°C or °F
Display: 72 mm (2.83") resistive touch TFT, 320 x 240 pixels, backlit
Configurable Parameters: Temperature units, alarms, signal processing, date and time, data logging, power options, graph channels
Temperature Units: °F or °C
Alarm Configuration: 12 x alarms (2 per channel) with adjustable level, individually configurable as HI or LO
Signal Processing: Average, minimum, maximum, standard deviation, 2-channel temperature difference
Display Response Time: 1 second
Operating Temperature: 0 to 50°C (32 to 122°F)
Power Supplies: Built-in rechargeable battery, USB, or 5 Vdc adaptor (included)
Battery Life: 32 hour logging with full display brightness; up to 96 hours while logging in power saving mode
Weight: 200 g (7 oz) without thermocouples
Dimensions: 136 W x 71 H x 32 D mm (5.35 x 2.8 x 1.25")
Data Logging Specifications
Data Logging Interval: 1 to 86,400 seconds (1 day)
Maximum SD Card Capacity: 32 GB SD Card (4 GB included)
Variables Logged: Measured temperature, cold junction temperature, alarm events
File Format: .csv (can be imported to Excel)
Configurable Parameters: Sample period, number of samples, scheduled start date and time
RoHS 2015/863 - View Certificate
CE Approved
UKCA
The specs online state Spring Clamps for RTD channel 5 and 6, but one of the two user manuals show a stereo 3.5 mm connector. Can you please confirm the connector type?
The RDXLSD-USB uses spring clamp terminals the older RDXLSD used the 3.5mm stereo connectors.
Date published: 2023-06-21
Can the touch screen be replaced
Thank you for your inquiry. The touch screen cannot be replaced. A new unit would be required.
Date published: 2023-09-05
Are the channels isolated?
The channels are not isolated and when measuring conductive material we suggest using ungrounded thermocouples.
Date published: 2021-04-06
Hello, I am trying to use port 5 and 6 and having no luck. (It says you can use two wire PT 100 wire) so I am trying with K type thermocouple wire. should this work? Is PT and thermocouple the same. Please advise great magical one lol thanks
Thank you for your inquiry. This model accepts four thermocouple inputs for ports 1 through 4 only, and 2 PT 100 RTD inputs for ports 5 and 6 only. PT 100 RTD sensors are not the same as type K thermocouples. We offer a wide range of PT 100 RTD sensors for you to select from from our website.
Date published: 2020-06-10
I'm trying to get information on Modbus communication with this unit and am not having much luck. The communications link in this manual ( https://assets.omega.com/manuals/M5717.pdf ) does not work. Can you point me in the right direction?
Thank you for your inquire
This information will need to be answered by are engineers directly to discuss in detail
please contact them at temperature@omega.com
Date published: 2020-04-24
How often do I need to calibrate this logger?
Omega recommends calibration at least once per year and more if used in a critical application.
Date published: 2023-02-06
I am having a problem figuring out the Data logging. I put the thermal couple in oven. And hit the start button. But when I stop it and hook it up to the computer there is no files to view. What can cause this ? I’m guessing a human error.
The Data is stored on the SD Card which you remove and download into the SW and when you use the USB cable it is a live connection directly to the SW on your computer. If you still have questions contact the temperature group at temp@omega.com.
Date published: 2021-07-16
is it possible to display live data to laptop? do you have any laptop software to display live data?
Hello, thank you for your question. The free software in the product page can be used to display live data, change settings, and log data. Alternatively, if you want to integrate into your own software, you can use the Modbus over USB interface instead.
Date published: 2020-07-08
I am looking for a similar unit to pass through a continuous oven of up to 400F. Do you have a one with an appropriate shielding case? Time at temp is less than 30 minutes, say 60 minutes absolute worst case. Also, I need to measure product temp not air.
Thank you for your question. Unfortunately, we do not carry the item you are looking for at this time. Maybe in the future.
Date published: 2021-03-26
What is CAL-3?
Thank you for the inquiry. CAL-3 is for the optional NIST traceable calibration certificate. This is a comparison of meter readings against our lab reference standards.
Best regards
OMEGA
Date published: 2023-04-09
Ready-Made Insulated Thermocouples with Kapton®, PFA, Glass Braid Insulation and Molded Connectors
C$141.22
0 In Stock