Call us at 1-888-826-6342
Back To Top
Load More Items from this family (3) ...
DIN Rail Signal Conditioners
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Added to Your Shopping Cart
DRA-ACT-S Series DIN Rail Conditioners are self powered AC Current/Voltage input and convert to either 0-1mA or 0-20mA output. Self powered design.
| Product Number | Number of Inputs | Input Type | Input Ranges | Number of Output | Output Type | Response Time/Frequency | Form Factor | Accuracy Rating | Supply Voltage Type | Supply Voltage | Other Features |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
1
|
AC Current
|
0 to 1 Aac
|
1
|
0 to 20 mA
|
40 to 400 Hz
|
Din Rail
|
Better
|
Self-Powered
|
Not Applicable
|
Not Applicable
|
|
|
AC Voltage
|
0 to 300 Vac
|
mA
|
Loop
|
4000 V
|
Trim Pot
|
|||||
|
|
AC Voltage
|
AC Voltage
|
0 to 150 Vac
|
mA
|
Process
|
Loop
|
4000 V
|
Trim Pot
|
|||
|
|
AC Voltage
|
AC Voltage
|
0 to 300 Vac
|
mA
|
Process
|
Loop
|
4000 V
|
Trim Pot
|
|||
The DRG-AR Series Conditioners are TC, RTC, DC or AC voltage and current input with 2 SPDT Relay Outputs. Field configurable ranges with adjustable setpoints.
| Product Number | Input Type | Input Ranges | Output Type | Supply Voltage Type | Additional Feature |
|---|---|---|---|---|---|
|
|
AC Current/Voltage
|
100 mV to 200 V, 10 mA to 100 mA
|
2 Relays
|
DC
|
Field Configurable
|
|
|
RTD
|
(-200) to 850 °C
|
2 Relays
|
DC
|
Field Configurable
|
The DRST-AC measures AC current or voltage signals and outputs passive or active current signals. UL and c-UL approved. Universal power. Programmer required.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Display Type | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|---|
|
|
AC Current/Voltage
|
AC Current/Voltage
|
0 to 5 A, 0 to 300 Vac
|
mA, V
|
Process
|
Programmer
|
AC/DC
|
2300 V
|
Display Programmer
|
The DIN Rail DMD4380 Series converts, amplifies, filters and optically isolates mA or V input signals to process current or voltage outputs. Loop powered w/ 1200V isolation.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
0 to 50 Vdc, 0 to 50 mA dc
|
mA, V
|
Process
|
AC
|
1200 V
|
Trim Pot/Switch
|
|
|
mA, V
|
Process
|
0 to 50 Vdc, 0 to 50 mA dc
|
mA, V
|
Process
|
DC
|
1200 V
|
Trim Pot/Switch
|
The DRSL-SP3 is a repeater/splitter that isolates and converts 1 bipolar process input to 2 process outputs. DIP switch selectable ranges, slim housing, high accuracy.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
±20 mA, ±10Vdc
|
mA, V (x2)
|
Splitter
|
DC
|
300 V
|
Switch
|
Bipolar Splitter
|
TXDIN101 has thermocouple, RTD, and mV input with 4-20mA output. LED display, configuration TX69-CABLE sold separately required to program via PC.
| Product Number | Input Type | Input Ranges | Output Type | Display Type |
|---|---|---|---|---|
|
|
Universal (TC, RTD, mV)
|
See Detail Specs
|
mA
|
LED
|
TXDIN400 series transmitters accept thermocouple or RTD input (TX401) or process voltage, current, or resistance (TX402). Configurable via RFID with TX400-RFID accessory.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, mV
|
Temperature
|
See Detail Specs
|
mA
|
Process
|
Loop
|
1000 V
|
RFID Programmer
|
|
|
Resistance, mA, mV
|
Process
|
0 to 4K Ohm, 0 to 20 mA, 0 to 10 Vdc
|
mA
|
Process
|
Loop
|
1000 V
|
RFID Programmer
|
The DRSL-RTD-LP is a 2, 3, or 4-wire PT100 RTD input conditioner. Output loop powered with high accuracy and slim housing. Pre-calibrated temp range DIP switch selected.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
RTD
|
Temperature
|
-200 to 850°C
|
mA
|
Process
|
Loop
|
None
|
Switch
|
DRA-ACT-4 Series DIN Rail Conditioners take a 4 wire AC Current/Voltage input and converts to 4-20mA output. AC Powered 115V or optional 230 V power.
| Product Number | Number of Inputs | Input Type | Input Ranges | Number of Output | Output Type | Response Time/Frequency | Form Factor | Accuracy Rating | Supply Voltage Type | Supply Voltage | Other Features |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
1
|
AC Voltage
|
0 to 150 Vac
|
1
|
4 to 20 mA
|
40 to 500 Hz
|
Din Rail
|
Better
|
AC
|
115 Volts
|
4-Wire AC Powered Design
|
|
|
AC Voltage
|
AC Voltage
|
0 to 400 Vac
|
mA
|
Process
|
AC
|
4000 V
|
Trim Pot
|
|||
The DRSP-I Series are DC current splitters that take one 4-20mA input to two 4-20mA outputs w/ AC or DC power. Zero and span adjustments for each output, status LEDs.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
4 to 20 mA
|
mA (x2)
|
Splitter
|
DC
|
1200 V
|
Trim Pot
|
|
|
mA
|
Process
|
4 to 20 mA
|
mA (x2)
|
Splitter
|
AC
|
1200 V
|
Trim Pot
|
The DRSL-TEMP is an output loop powered temperature signal conditioner. Accepts Type J, Type K, or 2, 3 or 4 wire Pt100 RTD input. Slim housing, high accuracy.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD
|
Temperature
|
J -100 to 1200°C, K -180 to 1372°C, Pt 100 RTD -200 to 850°C
|
mA
|
Process
|
DC
|
300 V
|
Switch
|
The DRC-4710 and 4720 are DIN Rail bridge input signal conditioners that accept bridge (strain gage, load cell, or voltage) inputs and have 0-10Vdc or 4-20mA outputs.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
0 to 30 mV dc
|
V
|
Process
|
DC
|
None
|
Switch
|
|
|
mV
|
Bridge, strain, mV
|
0 to 30 mV dc
|
mA
|
Process
|
DC
|
None
|
Switch
|
TXDIN1600S strain gage/load cell transmitter accepts 0.2 to 7.5 mV/V inputs with 5V excitation. Universal current, bipolar voltage output. Remote tare, front panel config.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
-38 to 38 mV dc
|
mA, V
|
Process
|
DC
|
500 V
|
Pushbutton/Software
|
The IDRN-IDRX Conditioners are TC, RTD, process, frequency, AC voltage input and provide analog or digital outputs. IDRN provides process out. IDRX provides RS-485 Output.
| Product Number | Number of Inputs | Input Type | Input Ranges | Output Type | Other Features |
|---|---|---|---|---|---|
|
|
1
|
Frequency, Pulse
|
Not Applicable
|
2-wire RS-485
|
IDRN-FP
|
|
|
1
|
Process
|
400 mV to 10 Vdc 0 to 20 mA
|
2-wire RS-485
|
IDRN-PR
|
|
|
2
|
Frequency, Pulse
|
Not Applicable
|
0 to 10V @ 10 mA max 0 to 20 mA or 4 to 20 mA, 10V compliance
|
IDRX-FP
|
|
|
1
|
Process
|
400 mV to 10 Vdc 0 to 20 mA
|
0 to 10V @ 10 mA max 0 to 20 mA or 4 to 20 mA, 10V compliance
|
IDRX-PR
|
|
|
2
|
Strain Gage, Bridge Transducer-Signal
|
0 to 30 mV 0 to 100 mV±100 mV
|
0 to 10V @ 10 mA max 0 to 20 mA or 4 to 20 mA, 10V compliance
|
IDRX-ST
|
The DRG-SC Series Conditioners have models with TC, RTD, Pot, Freq., AC/DC Voltage/Current, Strain/Bridge inputs and field configurable outputs from 0-5V, 0-10V, 0-20mA.
| Product Number | Number of Inputs | Input Type | Number of Output | Output Type | Form Factor | Accuracy Rating |
|---|---|---|---|---|---|---|
|
|
1
|
DC Voltage and Current (bipolar)
|
1
|
0 to 5V, 0 to 10V, 0 to 1 mA, 0 to 20 mA, 4 to 20 mA, +-5V, +-10 V
|
Din Rail
|
Good
|
The DRSL-DISPLAY Programmer is required to program DRST-AC, DRST-DC, DRST-UN, DRST-UR, DRSL-U devices. Snaps onto the front panel with transferable configurations.
| Product Number | Input Type | Input Ranges |
|---|---|---|
|
|
Not Applicable
|
Not Applicable
|
TXDIN1600 series has a universal thermocouple, RTD, or process input and 4-20mA output. Configuration via USB cable (sold separately). Push button user trim, relay output
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, mA, mV
|
Universal
|
See Detail Specs
|
V
|
Process
|
DC
|
500 V
|
Pushbutton/Software
|
|
|
TC, RTD, mA, mV
|
Universal
|
See Detail Specs
|
2 Relays
|
Relay
|
DC
|
500 V
|
Pushbutton/Software
|
DIN-100 Conditioners convert analog signals to RS-485 to a PC or other processor based equipment. Input types are temperature, bridge, V or mA, D I/O. NV memory storage.
| Product Number | Input Type | Input Ranges | Output Type | Additional Feature | |
|---|---|---|---|---|---|
|
|
Voltage
|
+5V
|
Rs 485
|
Not Applicable
|
|
|
|
1
|
Voltage
|
+100 V
|
RS-485
|
Din Rail
|
|
|
1
|
Bridge
|
+30 mV 10V excitation
|
RS-485
|
|
|
|
1
|
Bridge
|
+100 mV 10V excitation
|
RS-485
|
|
The DRC-8900 Series Conditioners are available with TC, RTD, or mA inputs and Voltage outputs. Inputs and outputs are isolated and linearized. 24Vdc power w/ slim housing.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
4 to 20 mA
|
V
|
Process
|
DC
|
700 V
|
Trim Pot
|
|
|
TC (J)
|
Temperature
|
0 to 500°C
|
V
|
Process
|
DC
|
700 V
|
Trim Pot
|
|
|
RTD
|
Temperature
|
100 Ohm
|
V
|
Process
|
DC
|
700 V
|
Trim Pot
|
The DRSL-LPO Series Conditioners are 1 or 2 channel output loop powered 2 wire isolators. 1:1 signal ratio, low voltage drop, slim housing. 0.05% accuracy.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
4 to 20 mA
|
mA
|
Process
|
DC
|
300 V
|
Switch
|
1-Channel
|
|
|
mA
|
Process
|
4 to 20 mA
|
mA
|
Process
|
DC
|
300 V
|
Switch
|
2-Channel
|
DIN Rail Signal Conditioners
DIN Rail Signal Conditioners are essential for accurate data recording in a wide range of indus...
[+]