Call us at 1-888-826-6342
Call us at 1-888-826-6342
Digital Torque Meters with Selectable Unit and RS232 Output
0 to 15 kgf-cm
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$1,526.00 |
| 5-9 | C$1,449.70 |
| 10-24 | C$1,419.18 |
| 25-49 | C$1,358.14 |
| 50-99 | C$1,327.62 |
| 100+ | C$1,297.10 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Three Selectable Torque Units: kgf-cm, lb-in, N-cm
- High and Low Resolution Modes
- Fast and Slow Sampling Modes
- Auto Shut-Off Extends Battery Life
- Reading Hold
- Stores Minimum and Maximum Readings with Push-Button Recall
- RS232 PC Interface to Load Data into Your Logging or Recording Programs
HHTQ88 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Style
Torque Range
Output Signal
Accuracy
Accuracy Class
Connection Type
Cable Length
Features
The HHTQ88 is a precision test instrument for automotive, automation, laboratories, and general industrial applications. The unit comes complete with the torque sensor with built-in 12 mm (0.5') chuck and chuck key. Three selectable torque units (kgf-cm, lb-in, N-cm) give this instrument almost universal compatibility with all measuring systems. The HHTQ88 also has fast and slow sampling rates to fit most automation applications. The readings are easy to read, displayed in large 15 mm (0.6') high digits. The RS232 serial interface allows you to download data for use in your data logging or recording programs.
SPECIFICATIONS
Units: kgf-cm, lb-in, N-cm (N = Newtons)
Range: Up to 15 kgf-cm
Safe Overload: 150% of range
Functions: Auto off (after approx 20 min), reading hold, min and max
Accuracy: ±1.5% FS +5 digits, 23 ±5ºC, includes linearity, repeatabilityand hysteresis
Operating Temperature: 0 to 50ºC (32 to 122ºF)
Operating Humidity:<80% RH (non-condensing)
Sensor Chuck: 12 mm (0.5')
Power: 9 V alkaline battery (included)
Sampling Time:
Fast: Approximately 0.125 sec
Slow: Approximately 0.334 sec
Data Output: RS232 PC serial output
Meter Dimensions: 180 x 72 x 32 mm (7.1 x 2.8 x 1.3')
Sensor Dimensions: 48 D x 160 mm L (1.9 x 6.3')
Meter Weight: 225 g (0.5 lb)
Sensor Weight: 665 g (1.5 lb)
Sensor Cable: 1 m (39')
SPECIFICATIONS
Units: kgf-cm, lb-in, N-cm (N = Newtons)
Range: Up to 15 kgf-cm
Safe Overload: 150% of range
Functions: Auto off (after approx 20 min), reading hold, min and max
Accuracy: ±1.5% FS +5 digits, 23 ±5ºC, includes linearity, repeatabilityand hysteresis
Operating Temperature: 0 to 50ºC (32 to 122ºF)
Operating Humidity:<80% RH (non-condensing)
Sensor Chuck: 12 mm (0.5')
Power: 9 V alkaline battery (included)
Sampling Time:
Fast: Approximately 0.125 sec
Slow: Approximately 0.334 sec
Data Output: RS232 PC serial output
Meter Dimensions: 180 x 72 x 32 mm (7.1 x 2.8 x 1.3')
Sensor Dimensions: 48 D x 160 mm L (1.9 x 6.3')
Meter Weight: 225 g (0.5 lb)
Sensor Weight: 665 g (1.5 lb)
Sensor Cable: 1 m (39')
Do you have a recommend Calibration interval for the HHTQ35-100 Torx Watch ? Six months or one year ?
Recommended calibration interval is one year
Date published: 2022-03-02
Does this come with a calibration and certification?
Thank you for your inquire
This unit will come with a C of C only.
Hope this was helpful?
Date published: 2021-05-10
Can this be used for estimating torque of moving shaft?
This unit cannot be use to measure rotary torque. The sensor does not spin.
Date published: 2021-07-23