Call us at 1-888-826-6342.
Copper Immersion Heater 1.25" NPT Clean Water
Clean Water Immersion Heater 1 1/4" NPT Fitting
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$370.92 |
| 5-9 | C$352.37 |
| 10-24 | C$344.96 |
| 25-49 | C$330.12 |
| 50-99 | C$322.70 |
| 100+ | C$315.28 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- 1¼" NPT Brass Screw Plug
- 120 V and 240V, 1 Phase
- General Purpose Models NEMA-1 Rated and UL Listed
- Copper Sheath, Ideal for Clean Water Applications
MT-110-3A/120V Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Connection Type
Power
Power Density
Supply Voltage
Supply Voltage Type
Enclosure Type
Form Factor
Heating Element Length
Heated Medium
Sheath Material
The MT-1 series immersion heater is ideally suited for clean water requirements. Models are available with a general purpose terminal enclosure1 or a rugged moisture resistant explosion resistant terminal enclosure.
Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Section P for our complete selection of process controllers.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.
/* Designate voltage, insert 120 for 120 VAC or 240 for 240 VAC. Higher wattages available - contact OMEGALUX.
1. Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2. Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Section P for our complete selection of process controllers.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.
| E1 General Purpose Encl.1 Model No. | E2 Explos. Res./ Moist Res Encl.2 Model No. | kW | Phase | W/in2 | No. Elem. | Dim. B in (cm) |
| MT-160A/* | MT-160E2/* | 0.6 | 1 | 53 | 1 | 6 1/8 (16) |
| MT-175A/* | MT-175E2/* | 0.75 | 1 | 65 | 1 | 6 1/8 (16) |
| MT-110A/* | MT-110E2/* | 1 | 1 | 86 | 1 | 6 1/8 (16) |
| MT-110-3A/* | MT-110-3E2/* | 1 | 1 | 43 | 2 | 6 1/8 (16) |
| MT-112A/* | MT-112E2/* | 1.2 | 1 | 53 | 2 | 6 1/8 (16) |
| MT-115A/* | MT-115E2/* | 1.5 | 1 | 65 | 2 | 6 1/8 (16) |
| MT-120A/* | MT-120E2/* | 2 | 1 | 86 | 2 | 6 1/8 (16) |
1. Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2. Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
