Call us at 1-888-826-6342
Call us at 1-888-826-6342
USB Temperature & Humidity Sensor with Datalogging Software
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$319.59 |
| 5-9 | C$303.61 |
| 10-24 | C$297.22 |
| 25-49 | C$284.44 |
| 50-99 | C$278.04 |
| 100+ | C$271.65 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
SP-004-2 and IF-001-Interface are needed to replace RH-USB.
- USB Probe for Humidity and Temperature
- Free Software Converts Your PC into a Humidity and Temperature Meter, Data Logger or Chart Recorder
- Accurate to ±3% Relative Humidity, ±1°C (±1.8°F) Temperature
- 316 SS Housing and Removable Stainless Steel Sensor Filter
- Suited for Wall or Duct Mounting
RH-USB Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Measurement Type
Data Interface
The RH-USB relative humidity/ temperature sensor provides a standard USB output that directly feeds relative humidity and temperature directly into your PC. The free software displays,datalogs, and graphs the measurements. The compact design is ideal for wall or duct mounting. Each unit is factory calibrated to provide excellent sensitivity, fast response, and stability. The unit features a simple installation with a direct USB connection. The free user software converts your PC into both a humidity and temperature meter, chart recorder or data logger. The design features a 316 SS NEMA 4 (IP66) housing. A mounting kit is also available that allows for wall or duct mounting.
SPECIFICATIONS
Temperature:
Range: -17 to 49ºC (1 to 120ºF)
Accuracy: ±1ºC (±1.8°F)
Relative Humidity:
Range: 2 to 98% RH
Accuracy: ±3% RH (@ 15 to 90% RH)
Repeatability: ±1% RH
PC Interface: USB
USB Cable: Integral to sensor, 2 m (6') (shielded) Type A plug
Software (Included): Requires Windows® 2000, XP, or Vista operating system
Housing: 316 stainless steel
Dimensions: 138 L x 16 mm D (5.5 x 0.625")
Weight: 67 g (0.18 lbs)
SPECIFICATIONS
Temperature:
Range: -17 to 49ºC (1 to 120ºF)
Accuracy: ±1ºC (±1.8°F)
Relative Humidity:
Range: 2 to 98% RH
Accuracy: ±3% RH (@ 15 to 90% RH)
Repeatability: ±1% RH
PC Interface: USB
USB Cable: Integral to sensor, 2 m (6') (shielded) Type A plug
Software (Included): Requires Windows® 2000, XP, or Vista operating system
Housing: 316 stainless steel
Dimensions: 138 L x 16 mm D (5.5 x 0.625")
Weight: 67 g (0.18 lbs)
Rated 5 out of
5
by
BlairH from
Exactly what was needed!
We have had this unit installed and working with a MS Access database that reads the Temp / RH on a timer and prints it on the calibration certificate. Working perfectly so far!
Date published: 2016-11-14
Rated 4 out of
5
by
Martin33 from
Easy Temp/Humidity Logging
I bought this temperature/humidity probe for our physical testing lab and attached it to the USB port of a PC attached to a test instrument running in lab ambient conditions. The probe was easy to install after downloading Omega's software and logs our testing conditions but I had to get help running the software. Omega's data logging team was able to help.
Date published: 2016-11-07
Rated 5 out of
5
by
jake from
Great product for awesome price!
just bought this product a week ago and couldn't be more pleased. The usb and software makes using this device so easy and just requires downloading the software. The data is very very easy to copy and paste to excel. The software's plotting program is not the best but is good for a quick view of whats going on. 100% would recommend and I already thinking about how I can buy more sensors from omega... seriously so easy to use.
Date published: 2016-05-24
How can I connect my own software to the sensor? Do you provide a list of commands that can be sent via Serial communication?
You would need to use this software to have it work with the computer:
ftp://ftp.omega.com/public/DASGroup/products/RH-USB/TRH%20Central_1.3.17.0721_online.zip
If you want to use the telnet commands, here is the list:
ftp://ftp.omega.com/public/DASGroup/products/RH-USB/RH_USB%20Command%20Reference.pdf
Thank you for your question.
Date published: 2019-07-29
Is this require to be calibrated annually?
Performance of the sensor can vary depending on frequency of use, application and storage conditions, so there is no simple answer to your question. Calibration requirements are based on your company procedures. Some companies require equipment to be calibrated annually. Others are comfortable with calibration only when the item readings are drifting from the specs.
Date published: 2020-03-17
How is it that I am not able to configure that device under TOOLS > CONFIGURE > CHANNEL X? We ran the software in administrator mode. Serial No is not display correctly. The configure device button is gray out. What now?
Hi MaxV
For assistance in software set please email our data acquisition group at DAS@OMEGA.COM. Or you can call in and request assistance over the phone. 800-359-1660 and select Data Acquisition.
Best regards
OMEGA
Date published: 2020-04-03
Does this unit come with a calibration certificate? Does the unit need to be sent back to an authorized Omega dealer for re-calibration? Need to know for non-US locations.
Thank you for your question. All Omega products are provided with CAL-1 ( cert of conformance). You can request a Cal-2 ( nist instrument calibration) which is no charge when you place an order.
If service is required you can send back directly to Omega. Just contact Customer Service-1-800-622-2378 or CSERVICE@OMEGA.COM.
Date published: 2020-08-20
Is this sensor pressure rated? I.E. if placed in a sealed system (45psi), will it leak pressure through the sensor?
Thank you for the inquiry. This sensor is not rated for pressure. It would leak through.
Best regards
OMEGA
Date published: 2021-06-17
My RH-USB probe came with a white, porous plastic/teflon cover that slides over the end, blocking the inlet screens. Does this cap serve some purpose other than to keep crud from getting in the probe during shipping? Do I run the probe with it on or off?
Thank you for your inquiry Sonartech. The purpose of the cap is for protection during shipping. You can still use to cover the sensor for protection.
Date published: 2021-03-23
Can I use this sensor with a Linux based system such as CentOS as well as Python to access and obtain readings?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2022-04-14
What is the cost of recalibration for this sensor?
Hi Bob2727,
Thank you for the inquiry. For a current price estimate for a return for NIST traceable calibration ( "Cal-3" ) please email a request to cservice@omega.com. You might also try our chat window for immediate response.
Best regards
OMEGA
Date published: 2021-01-21
Accessories