Skip to search Skip to main content Skip to navigation

Call us at 1-888-826-6342

We noticed you are from . Visit your local site for regional offers and live support.
Back To Top

Probes with Lead Wires

63 Products
RTD Probe with Insulated Wire and Shrink-Tube Support

Omega's RTD probe with lead wire offers choice of 2-3- or 4-wire configuration. This is available in three temperature ranges covering -200°C to 600°C (-328 to 1112°F)

Small Diameter Immersion Thermocouple Probes with PFA cable

Configurable thermocouples with 0.010", 0.020", 0.032", or 0.040" diameter probes, metal transition joints and PFA insulated extension wires.

Thermocouple Probes with SS Overbraid Cable & Mini Connector

Thermocouple probes have a metal transition between the sensor & cable. Cable has a Stainless Steel Overbraid to protect it from damage and a miniature connector attached.

Class B RTD Sensors for Specialized Applications

Family of 100 ohm, Class B accuracy RTD sensors including surface mount, bolt down, immersion, air sensing and screw down designs. Sold in 3-Packs.

Thermocouple Probes with Lead Wire & Compact Transition

Small diameter (0.062" or less) thermocouple probes with PFA or Fiberglass extension cable and a compact transition joint. Use where space is limited.

Pipe Plug RTD Probes with NPT Fitting and Lead Wire

RTD Sensors great for installing into pipes or limited space applications. Single and Dual element designs, 1/8" or 1/4" NPT mounting threads available with 72" of lead wire.

Extreme Temperature Exotic Thermocouple Probes w/Lead Wire

Thermocouple probe assemblies with exotic sheath materials for extreme temperature applications up to 2315°C & lead wires. Available in type R, S, B, C, and D calibrations.

Immersion Thermistor Probes with 1/8" NPT Fitting & Lead Wire

Thermistor probes with 1/8" NPT mounting threads for liquid immersion and pressurized applications. Five resistances and two accuracies available.

Thermocouple Probes with a Compact Transition to Lead Wire

Small diameter (0.062" or less) thermocouple probes with a compact transition joint between the probe and PFA or Fiberglass extension cable. Use where space is limited.

Extruder RTD Probes with Compression Fittings

Thin-film element RTD probes with 1/8" NPT brass compression fittings and armored cable. Commonly used in extruder & molding equipment. Straight and bend options available.

Cut to Length Thermocouple Probes for Field Adaptation

Thermocouple probes that can be cut to the desired length with a standard tube cutter to fit field applications. Plastic plug in tube end protects the wires from sharp edges.

RTD Sensors for Specialized Applications

Family of 100 ohm, Class A accuracy RTD sensors including surface mount, bolt down, immersion, air sensing and screw down designs.

Thermocouple Probes with SS Tips for Plastic Extruders

Probes with Stainless Steel Tips for use under the high pressures and temps found in plastic extruders. Available in single & dual element options with 1/2"-20 NF threads.

Thermistor Probe with Detachable Connector Assy

Thermistor probe has a 1/8" NPT mounting thread and audio connector. Comes with a mating connector and extension cable. Several resistance & accuracy options available.

Integrated Circuit Temperature Probes

Probe contains an integrated circuit (IC) transducer AD592CN that provides an output in microamps that is proportional to temperature. Requires 4 to 30 VDC input voltage.

Thermocouple Probes with Lead Wire & Molded Mini Transition

Configurable thermocouple probes with lead wire. Molded transition joint from probe to cable is miniature (260°C max). Probe diameters range from .010" to .125".

RTD Probes with Mounting Threads and Lead Wire

Class A, pt100 RTD immersion probes with 1/8" NPT mounting threads. 40 inch long PFA insulated lead wires and 3-prong connector come standard.

Thermocouple Probes with Lead Wire & LCP Molded Transition

Configurable thermocouple probes with lead wire. Standard size transition joint from probe to cable is LCP molded (260°C max). Probe diameters range from .062" to .250".

RTD Probe with Insulated Wire and BX Armored Cable

Omega's "BX" armored probe is designed for resistance to abrasion and snagging and excessive movement. Comes with choice of PFA- or fiberglass-coated wires.

Probes with Lead Wires

Used when the probe is installed some distance from the logger, controller, or other data acquisition device. Available in a variety of lead wire types with stripped leads or connectors attached.
Searching for your items
en-CA
en
Save Configuration