Your feedback matters, take a quick surveyWebsite feedback
Standard Accuracy Ceramic Wire Wound Platinum RTD Elements
Ceramic Wire Wound Platinum RTD Elements - Class B
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$42.28 |
| 10-24 | C$40.17 |
| 25-49 | C$39.32 |
| 50-99 | C$37.63 |
| 100-199 | C$36.78 |
| 200+ | C$35.94 |
Please contact Technical Sales Team for assistance.
This part is no longer available. Please see A2105 as a suggested replacement.
- Platinum RTD Elements
- Single and Dual Element Versions Available
- 50 and 100 Ohms Models
- All Models in Stock for Fast Delivery
A2102 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Resistance or Output Type
Temperature Accuracy
Probe Diameter
Probe Length
Maximum Temperature Measurement
Minimum Temperature Measurement
Application
Number of Wires
OMEGA RTD elements can be used for a variety of temperature applications. Models are available for temperature ranges as broad as -200 to 850°C. Dual element RTDs are also available for applications where two different instruments need to monitor the same temperature.
Rated 4 out of
5
by
Javier from
poor packaging
The product was packaged very good and in a secure way for the ship, but the dimension of the boxes were bigger than of necesary . However the PT100 elements were not in the original blister where they could are more protected.
Date published: 2018-05-15
Rated 4 out of
5
by
vbermud from
Bare leads way too short
It would be extremely helpful if the bare leads came longer than 10 mm
Date published: 2020-06-06
Rated 5 out of
5
by
Luz Marina from
Your products hace excelent quality
Im happy with my product and im glad to buy more products from you.
Date published: 2018-10-17
What are the leads of these things made of ? They are very, very soft, and melt when soldered with 60/40 tin lead.
So what is the recommendation to solder, if they melt at soldering temperatures ? I suspect that they are forming another alloy with the tin-lead, with a melting point below the headline number
Date published: 2022-06-23
Is the ceramic body submersible in water?
Thank you for your inquiry rn_intc. No, it is not submersible in water.
Date published: 2022-11-07
