PST rejoint DwyerOmega. En savoir plus>
Colles époxydes et pâte silicone thermoconductrices
Thermally Conductive Epoxies and Thermally Conductive Grease
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$120.33 |
10-24 | C$114.31 |
25-49 | C$111.91 |
50-99 | C$107.09 |
100-199 | C$104.69 |
200+ | C$102.28 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Bonne conduction thermique
- Isolant électrique
- Résistance aux huiles, aux solvants et à la plupart des acides
- OMEGABOND™ 100: résine époxyde à 2 composants; bonne conductivité thermique, prise rapide à température ambiante, utilisation jusqu'à 130°C
- OMEGABOND™ 101: résine époxyde à 2 composants; conductivité thermique élevée, prise à température ambiante, utilisation jusqu'à105°C
- OMEGABOND™ 200: résine époxyde à 2 composants; conductivité thermique très élevée, prise en 2 heures à 205°C, utilisation jusqu'à 260°C
- OMEGATHERM™ 201: pâte silicone; conductivité thermique extrêmement élevée, ne colle pas, utilisation de -40 à 200°C
OB-100-16 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Material
Volume
Max Temperature
Mix Ratio By Weight
Tensile Shear
Additional Option
Description
Les résines époxydes OMEGABOND™ et silicones OMEGATHERM™ résistent à la chaleur et présentent une bonne conductivité thermique. Elles sont conçues pour réaliser l'adhésion permanente des sondes de température sur une gamme étendue de surfaces –métaux, céramiques, verre, plastiques, papiers et cartons.OMEGABOND et OMEGATHERM sont livrées sont la forme de 2 composants et conditionnées afin de pouvoir les mélanger et les utiliser facilement. Chacune de ces colles possède les caractéristiques spécifiques nécessaires à des mesures de température précises, rapides et fiables. Elles se caractérisent par une bonne adhérence et une bonne résistance aux efforts, une large plage de température et une conductivité thermique élevée, un fort isolement électrique, une consistance thixotrope, un durcissement rapide et une grande facilité d’utilisation.
Le «Twin Pak» se présente sous la forme d’une pochette plastique transparente divisée en deux compartiments isolés par un séparateur externe. On place la résine dans l’un des compartiments et le durcisseur dans l’autre en quantités égales. Il suffit ensuite de retirer le séparateur pour mélanger les deux composants en malaxant la pochette, puis de couper un coin pour appliquer la colle. Chaque «Twin Pak» est livré avec une notice d’utilisation dans une enveloppe plastique transparente.
Pour obtenir les caractéristiques complètes de ces produits, consultez la notice commerciale par le lien en bas de cette page.
Rated 4 out of
5
by
Anonymous from
Formula changed!
We use this epoxy weekly and have been buying it for many years. However, the last batch we purchased was a gel formula instead of the liquid we have become accustom to. Do no like it very much as it is difficult to fill a syringe and use it in the field.
Date published: 2015-12-04
Rated 5 out of
5
by
Diesel Tech Chattanooga from
Omegabond 101
I have been using OB-101 in the small packs for several years now to bond the printed circuit board to the frame/case, which as also the heat sink, on automotive Engine Control Modules manufactured with surface mount components. It withstands thermal expansion and contraction, and vibration, while also being a good thermal conductor and yet a good electrical insulator.
Shelf life is substantially longer that what is marked on the packets.
Date published: 2019-04-15
Rated 5 out of
5
by
Luis Licea from
Thermal Epoxic
Excellent product this epoxic it’s used for laboratory test
Date published: 2024-07-17
Rated 4 out of
5
by
Moldinsertguy from
Good Product and great service.
We have been using this epoxy for many years and have not experienced any issues with the exception of the more recent texture difference with part A. It used to be smooth and now it is more chunky and dry, making it hard to measure. By warming it up beyond room temperature, we are able to soften it making it easier to portion. This extra step takes away 1 star. The service the company provided is excellent with order follow through and general customer service.
Date published: 2024-01-25
Rated 5 out of
5
by
DeanD from
Thermal Epoxy Works Great
I like the variety of potting and full cure times at room temp and with heat. This tends to hold on to my thermocouples well.
Date published: 2022-03-24
Rated 5 out of
5
by
Adhesive Distributor from
Omega is a great source for quality products
The product we have purchased has worked well & the website is easy to use/understand. Product is shipped fairly quickly. We have been completely satisfied with our purchases.
Date published: 2021-12-22
Rated 3 out of
5
by
Amanda Mo from
Way too long to ship.
The product works as expected but a 3 week lead time is ridiculous.
Date published: 2021-08-14
Rated 5 out of
5
by
Anonymous from
Used on automotive ECM's.
I have used this for several years on automotive ECM's where SMD power transistors and switches are soldered to the PCB, which is then attached to an aluminum case for heat dissipation. This a requires a product with good thermal conductivity with a high dielectric rating. It has a very smooth and easy to spread consistency, and a good balance of pot life v.s. cure time.
Date published: 2020-07-14
Hi, I am using OB-102, I received A and B parts but i could not find the proportion of mix. Please let me know the proportion both by weight and by volume. Thank you
Thank you for your inquiry. For OB-102, the mix ratio is 100 parts material to 3.5 parts catalyst by weight.
Date published: 2024-09-23
Can you recommend a filler / thickener for OB-200? I am looking to bond a stainless cooling tube to a stainless plate and the OB-200 is a bit too thin to get a nice fillet. Would Stainless steel powder be an acceptable filler for OB-200?
Hi,
Omega does not sell nor have we tested any thickening agents with the OB-200. If you need a cement with a bit thicker consistency you might want to look at a cement like the OB-600 as a possible substitute.
Date published: 2020-01-29
Hi, we are looking for a tap or epoxy to secure thermocouples on PCB surface that can start from -20C to +100C for thermal cycling test, the tap or epoxy is to help keep the thermocouples on the surface of the PCB during a slight shock or vibration
Thank you for your inquiry. The OB-100 can be used for this process.
Date published: 2021-11-24
Is OMEGABOND 101 Two Part Epoxy good for potting electronics? How well does it handle thick layers and or voids between adhered surfaces? How thick/viscus is the epoxy as you work with it?
OMEGABOND®100—a fast (8 to 12 minute setting time), room temperature, two-part epoxy. Recommended for easy temporary and permanent bonding of beaded wire and “cement-on” thermocouples. Adheres to metals, ceramics, epoxy laminates, glass, wood, concrete and many other materials—for temperature measurements up to 129°C (265°F). It is not recommended for those endeavoring to achieve the ultimate in precision and speed of response, since this unfilled system has a relatively low thermal conductivity.Temporary installation of beaded wire thermocouples can be achieved by using a very small amount of OMEGABOND® 100 to tack the bead to the surface and packing OMEGATHERM® 201 around the exposed surface to improve heat transfer. This clear syrup consistency—100% solid adhesive — contains no solvents and has good strength and electrical insulation characteristics. Note: The working time after mixing the 2-part system at room temperature is only 6 to 8 minutes. OMEGABOND 100 is available in “Twin Pak” packs and 1- and 2-pound kits.
For larger gaps, up to 1/4", review the OB-400 High Temperature Air Set Cement.
Date published: 2021-02-16
What is the shelf life and optimal storage conditions for OB-101-1/2 packs? The standard 101 manual says 70F and one-year shelf life if container remains sealed. Just looking for clarity for the art packs.
The environmental storage and shelf life is the same regardless of the amount being stored.
Date published: 2022-06-24
Can you use bond gap beads with this epoxy? If so what beads do you recommend?
Sorry not sure what bond beads are so please send an inquiry to temp@omega.com with additional information so it can be reviewed.
Date published: 2023-09-20
What is the MINIMUM continuous temperature rating for cured OB-101?
Hi Matt,
Thank you for the inquiry. Minimum temperature -55 deg C.
Best regards
OMEGA
Date published: 2021-01-08
Can any of the omega bond thermal epoxies cure at room temperature?
Thank you for your inquiry Apz24. The OB-100 and OB-101 cure at room temperature. The OB-100 has a cure time of 8 to 12 minutes set at room temperature. The OB-200 has to cure at elevated temperatures. The OT-201 does not have a required cure time.
Date published: 2023-06-03