Appelez-nous au 1-888-826-6342
NEMA Type 1 Electrical Enclosures with Knockouts, 18x16 to 36x24
NEMA Type 1 Electrical Enclosures with Knockouts, sized from 18x16 to 36x24
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$341.62 |
| 5-9 | C$324.54 |
| 10-24 | C$317.71 |
| 25-49 | C$304.04 |
| 50-99 | C$297.21 |
| 100+ | C$290.38 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- 0.063 and 0.075' Carbon Steel Depending On Its Size
- Spot Weld Construction
- Knockouts Provided in The Top, Bottom, Right and Left Side of Enclosure
- Standoffs Provided For Mounting Optional Panels
SCE-18N1606NK-O Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Size
Enclosure Color
Enclosure Material
Closure Type
Works With
Application
Designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.
Finish
Optional precaution blue texture, safety orange or taupe tan textured power coat finish inside and out over phosphatized surface. Panels are powder coated to match the enclosure.
Industry Standards
NEMA Type 1
UL Listed Type 1
CSA Type 1
IEC 60529 IP 30
Designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.
Finish
Optional precaution blue texture, safety orange or taupe tan textured power coat finish inside and out over phosphatized surface. Panels are powder coated to match the enclosure.
Industry Standards
NEMA Type 1
UL Listed Type 1
CSA Type 1
IEC 60529 IP 30
Rated 5 out of
5
by
GeorgeWM from
CNC Control Box
This enclosure was purchased for the build of an CNC router. Even though it had a small dink in the upper left hand side of the corner of the door on shipping there is nothing wrong with this box. I will be purchasing from Omega in the future for my other builds I have coming up.
Date published: 2016-09-04
Mounting Straps for NEMA Type 1 Enclosures
Pre-cut 35x7.5 mm DIN Rail - Lengths are Cut to Match Width of Sub-panels