text.skipToContent text.skipToNavigation

Peristaltic Pump

Peristaltic Pump and Pump Motor

Article# FPU5-MT-220

Peristaltic Pump and Pump Motor FPU5-MT-220 FPU5-MT-220
  • Stainless Steel Rotor Assembly
  • Ideal for Use in Sterile, Corrosive, or General Operating Environments
  • Flowrates from 1.0 to 2280 mL/Min (36 GPH)
  • Mounts Directly onto OMEGAFLEX ® Motor or Compatible Pump Motor
  • Easily Stackable Mounting for Multichannel Pumping
  • Three-Roller Geometry Reduces Pulsation and Improves Priming
  • Polysulfone Housing for Durability and Chemical Resistance
  • Digital Display of Flowrate, RPM, Total Volume, Fluid Temperature (°F or °C), Flow Duration, or Tube ID
  • Flow Rate 1.0 to 2280 mL/Min (10 to 600 RPM) Reversible
  • Easy-to-Read Display
  • Type K SMP Female Thermocouple Input
  • Tachometer Feedback, ±0.5% Speed Control
  • Accepts Two Pumps, One on Each Side or Two Stacked Together
  • Membrane Keypad for Easy Calibration
  • Remote Control Options Aux. In: Remote Start/Stop Aux. Out: Remote Monitor
  • Built-In Electronic Braking and Reversing for Fast Stops and Directional Changes
  • Accepts Metric or English Tube Sizes
  • Displays Information in English, French, Spanish, German, or Italian

The FPU500 FPU5MT series has been discontinued. Please see the FPU2000A-Series as a possible alternative or contact our Flow Engineering department.

The FPU500 Series peristaltic pumps from OMEGA offer exceptional simplicity, ease of use, and variable flow capability. A motor turns the pump’s rollers, which squeeze fluid through precision-bore tubing in a wavelike motion. The fluid does not come into contact with the pump; only the outside wall of the tubing does. This makes these pumps ideal for use in sterile, corrosive, or general fluid flow operating environments.

The pump is self-priming and non-siphoning. When one section of the tube fatigues, simply move the tube along to an unused section and continue pumping. No tools are required to load the tube. A precision-molded tubing cavity provides the proper occlusion for the recommended tubing. A tube clamp holds the tubing securely in place. Tubing is easily changed without removing the pump.

One pump can be used for many different applications, or you can mount two pumps onto the motor. The pumps work with a wide variety of OMEGAFLEX™ plastic tubing. Vinyl, FKM, Tygon, silicone, Santoprene, and Norprene® tubing can be purchased in a broad range of sizes. The standard rotor assembly is made of stainless steel.

The FPU500 pump can be purchased with an optional adaptor plate that can be used to mount the pump to a motor other than the FPU5-MT pump motor. The pump comes standard with 2 short mounting screws, used to mount one pump at a time. If you need to stack two pumps, order long mounting screws.

Maximum Back Pressure: 20 psi
Maximum RPM to Prime: 100 RPM
Tube Wall: 1.6 mm (1?16")
Fluid Temperature Range: -46 to 149°C (-50 to 300°F)
Dimensions, Pump: 102 H x 102 W x 57 mm D (4 x 4 x 2¼")
Optional Mounting Plate: 76 H x 64 W x 3.2 mm D (3 x 2½ x 1?8")
Weight, Pump: 408 g (14.4 oz)
Optional Mounting Plate: 91 g (32 oz)
Maximum Tubing Size: 8 mm (5?16")
Maximum Tube Durometer: 65 Shore A

The OMEGAFLEXR FPU5-MT pump motor offers microprocessor control and a digital display, and is designed to be fully compatible with OMEGA's FPU500 pump. No mounting plate is needed, just two mounting screws. A 1?10 HP (75 W) motor provides flow rates of up to 2280 mL/minute. The user enters values and controls all operations through a convenient membrane keypad. A dot matrix LCD provides for easy viewing. Calibrating the unit is easy with the user-friendly control software. Simply select a tubing size and the desired flow rate, and the pump motor locks in the required RPM. Select nominal calibration values stored in ROM (read only memory) or calibrate via gravimetric or flowmeter measurements. Fluid temperature may be displayed (using an optional thermocouple probe). The last flow settings are stored in memory when the drives are shut off.

Motor: Reversible, 1?10 HP (75 W), 90 Vdc
Display: 16-character dot matrix LCD, 9 mm H (3?8") characters
Power: 90 to 130 Vac, 1.5 A; 190 to 260 Vac, 0.8 A
Line Cord: 1.8 m (6') with U.S. standard plug on 115 Vac units; European plug on 230 Vac units
Housing: Painted sheet metal with rubber feet; units are stackable
Dimensions: 152 H x 254 W x 254 mm D (6 x 10 x 10")
Weight: 8.2 kg (18 lb)
loading all models
loading all reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getReviews, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
loading all QA

What are the dimensions of the pump motor?

Asked by: Jordan92
Thank you for your inquiry. The FPU500 only includes the pump head. The pump motors have been discontinued for this series. For an alternative pump, please contact flow@omega.com with your process requirements and we can help you select a pump for your application.
Answered by: AS Engineer
Date published: 2020-02-25

Does it work with Masterflex L/S C-Flex tubing?

Asked by: Nasrin
Thanks for connecting with Omega. Up to 68 durometer tubing can be used in the FPU500 series pumps. Please contact us at flow@omega.com if you have any further questions. Thank you
Answered by: Jane
Date published: 2019-05-29

What is the maximum viscosity recommended for this Pump?

Asked by: Mike_02451
Thank you for your question. The maximum viscosity of the FPU500 can handle is 8,000 CPS. Page 9-5 of our manual shows the adjusted flow rates for different viscosities and tube sizes. Please contact our Tech Support if you have any further questions.
Answered by: Jane
Date published: 2019-05-13
  • y_2020, m_5, d_12, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_CA, sid_FPU5-MT-220, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms
Long mounting screws (2)
12 In Stock
Short mounting screws (2)
21 In Stock
Enregistrer la configuration