Skip to search Skip to main content Skip to navigation

Appelez-nous au 1-888-826-6342

Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.
Retour au sommet

Blocs de jonction et Cosses

32 produits
Barrier Strips, Thermocouple Spade Lugs and Terminal Lugs

Barrier Strips, Thermocouple Spade Lugs and Terminal Lugs, Complete with Color-Coded Calibration Type Terminal Lugs Installed, Accepts Wire from 24 AWG to 16 AWG

Voir Spécs
Thermocouple Terminal Blocks Type K, J, E, T, R

Thermocouple terminal blocks are offered in Type K, J, T, E and R/S. The terminal block contacts are made with thermocouple-grade calibration alloys.

Voir Spécs
Thermocouple DIN Rail Terminal Blocks, Narrow 10.7 mm Width

DRTB-2 Series thermocouple terminal blocks, manufactured with thermocouple-grade alloys guarantee accurate readings, SMP-compatible female miniature thermocouple connector.

Voir Spécs
Terminal Blocks for Connection Heads, Ceramic or Bakelite

CH-TERMINAL-BLOCKS, Terminal Blocks for OMEGA Connection Heads, for Single and Duplex Elements, in Ceramic or Bakelite, and a wide variety of fittings

Voir Spécs
6.2 mm Width, Feedthrough Terminal Block, 600Vac/30A

All 3 technologies use same bridge system, allowing individual potential distribution & quickly bridged connections among same terminal block type or across different types.

Voir Spécs
DIN Rail Fuse Terminal Blocks for 5x20mm Fuse, Single Circuit

Fuse terminal blocks provide a convenient way to add fuses to your DIN rail wire panels. The fuse blocks accept 5 x 20 mm fuses and are rated up to 300V and 15A.

Voir Spécs
Screw Connection and Component Terminal Blocks

The metal portion of the XB Series terminal blocks are made of high-grade, strain-crack and corrosion proof copper alloys, 600 Vac/16 A, 6.2 mm Width.

Voir Spécs
AVK Series Feed Through DIN Rail Mounting Terminal Blocks

AVK Series Feed Through Terminal Blocks offer savings cost, space and time, mount on standard 35 x 15mm and 35 x 7.5 mm DIN rails & are design to meet world wire standards.

Voir Spécs
DIN Rails, 35x7.5 mm & 35x15 mm, Standard and Pre-Cut Lengths

DRTB-Rails enhances capabilities, accepted throughout the world, allowing the mounting a variety of control components, devices & terminal blocks

Voir Spécs
Double and Triple Level Feed-through or Sensor Terminal Blocks

The XBUTT double-level terminal blocks reduce space requirements by 50% over single-level terminal blocks. These terminal blocks are suitable for 2-wire RTD connections.

Voir Spécs
Sensor & Multi-Level DIN Rail Terminal Blocks Screw Connection.

PIK-4N terminal blocks allows 2 level feed through connections, the PIK-4NK has an internal connecting bridge for common feeds that allow for one-in & three-out connections.

Voir Spécs
Round Terminal Blocks, -29 to 220°C Temperature Rating

OMEGA's color-coded CH series terminal blocks are designed to fit metal-sheathed cable or probes between 1.5 and 6 mm (1/16 and 1/4") in diameter.

Voir Spécs
Insulation Displacement Connection Terminal Blocks

Superior design of the Insulation Displacement Connection (IDC) technology terminal blocks reduces wiring installation time & labor, especially in high-volume applications.

Voir Spécs
Disconnect & Fuse Screw Connect DIN Rail Mounting Terminal Blocks

The ASK disconnect or fuse terminal blocks allow a circuit to be 'opened' without disconnecting the wire from the screw connections, will hold 5 x 20 mm or 5 x 25 mm fuses.

Voir Spécs
Ground Terminal Blocks, 8 kV, 8.2mm Width, Green/Yellow

The XB Series offers a complete terminal block system with a universal, range of accessories, operating temperatures up to 125°C, Polyamide 6.6 housings.

Voir Spécs
Circuit Breakers for Branch Circuit Protection

The UL 489 Series miniature molded case circuit breakers are DIN rail mountable and provide feeder and branch circuit protection per UL 489, 17.5 mm (0.69") Width per Pole.

Voir Spécs
Fils thermocouple tungst�ne-rh�nium de petit diam�tre

The XB Series offers a complete terminal block system with a universal range of accessories, operating temperatures up to 125°C, made of Polyamide 6.6.

Voir Spécs
DIN Rail Mount Circuit Breakers, 17.5 mm (0.69") Width per Pole

R Series UL1077 supplementary protectors are made to trip faster than a standard UL489 circuit breaker, therefore providing additional protection for specific devices

Voir Spécs
Screw Connection Multi-Conductor Terminal Blocks

The XB Series offers a complete terminal block system with a universal range of accessories, 6.2mm Width, 150Vac/30A, Wide 4-wire muti-conductor TB.

Voir Spécs
16 mm (0.63 in) Width, Terminal Block, 600Vac/150A

XB Series offers a complete terminal block system with accessories, marking, bridging & testing standardized across the different clamping technologies.

Voir Spécs

Blocs de jonction et Cosses

Wide variety to complete your connection with DIN rail mountable, round terminals, relays, fuse terminals, screw connections and double to triple level feed throughs.
Searching for your items
fr-CA
fr
Enregistrer la configuration