Skip to search Skip to main content Skip to navigation

Appelez-nous au 1-888-826-6342

Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.
Retour au sommet

Blocs de jonction et Cosses

32 produits
Barrier Strips, Thermocouple Spade Lugs and Terminal Lugs

Barrier Strips, Thermocouple Spade Lugs and Terminal Lugs, Complete with Color-Coded Calibration Type Terminal Lugs Installed, Accepts Wire from 24 AWG to 16 AWG

Thermocouple Terminal Blocks Type K, J, E, T, R

Thermocouple terminal blocks are offered in Type K, J, T, E and R/S. The terminal block contacts are made with thermocouple-grade calibration alloys.

Thermocouple DIN Rail Terminal Blocks, Narrow 10.7 mm Width

DRTB-2 Series thermocouple terminal blocks, manufactured with thermocouple-grade alloys guarantee accurate readings, SMP-compatible female miniature thermocouple connector.

Terminal Blocks for Connection Heads, Ceramic or Bakelite

CH-TERMINAL-BLOCKS, Terminal Blocks for OMEGA Connection Heads, for Single and Duplex Elements, in Ceramic or Bakelite, and a wide variety of fittings

6.2 mm Width, Feedthrough Terminal Block, 600Vac/30A

All 3 technologies use same bridge system, allowing individual potential distribution & quickly bridged connections among same terminal block type or across different types.

Screw Connection and Component Terminal Blocks

The metal portion of the XB Series terminal blocks are made of high-grade, strain-crack and corrosion proof copper alloys, 600 Vac/16 A, 6.2 mm Width.

AVK Series Feed Through DIN Rail Mounting Terminal Blocks

AVK Series Feed Through Terminal Blocks offer savings cost, space and time, mount on standard 35 x 15mm and 35 x 7.5 mm DIN rails & are design to meet world wire standards.

DIN Rail Fuse Terminal Blocks for 5x20mm Fuse, Single Circuit

Fuse terminal blocks provide a convenient way to add fuses to your DIN rail wire panels. The fuse blocks accept 5 x 20 mm fuses and are rated up to 300V and 15A.

DIN Rails, 35x7.5 mm & 35x15 mm, Standard and Pre-Cut Lengths

DRTB-Rails enhances capabilities, accepted throughout the world, allowing the mounting a variety of control components, devices & terminal blocks

Double and Triple Level Feed-through or Sensor Terminal Blocks

The XBUTT double-level terminal blocks reduce space requirements by 50% over single-level terminal blocks. These terminal blocks are suitable for 2-wire RTD connections.

Ground Terminal Blocks, 8 kV, 8.2mm Width, Green/Yellow

The XB Series offers a complete terminal block system with a universal, range of accessories, operating temperatures up to 125°C, Polyamide 6.6 housings.

Round Terminal Blocks, -29 to 220°C Temperature Rating

OMEGA's color-coded CH series terminal blocks are designed to fit metal-sheathed cable or probes between 1.5 and 6 mm (1/16 and 1/4") in diameter.

Insulation Displacement Connection Terminal Blocks

Superior design of the Insulation Displacement Connection (IDC) technology terminal blocks reduces wiring installation time & labor, especially in high-volume applications.

Disconnect & Fuse Screw Connect DIN Rail Mounting Terminal Blocks

The ASK disconnect or fuse terminal blocks allow a circuit to be 'opened' without disconnecting the wire from the screw connections, will hold 5 x 20 mm or 5 x 25 mm fuses.

Sensor & Multi-Level DIN Rail Terminal Blocks Screw Connection.

PIK-4N terminal blocks allows 2 level feed through connections, the PIK-4NK has an internal connecting bridge for common feeds that allow for one-in & three-out connections.

Fils thermocouple tungst�ne-rh�nium de petit diam�tre

The XB Series offers a complete terminal block system with a universal range of accessories, operating temperatures up to 125°C, made of Polyamide 6.6.

Circuit Breakers for Branch Circuit Protection

The UL 489 Series miniature molded case circuit breakers are DIN rail mountable and provide feeder and branch circuit protection per UL 489, 17.5 mm (0.69") Width per Pole.

DIN Rail Mount Circuit Breakers, 17.5 mm (0.69") Width per Pole

R Series UL1077 supplementary protectors are made to trip faster than a standard UL489 circuit breaker, therefore providing additional protection for specific devices

DIN Rail Fuse Holders, 1, 2, & 3-Pole, With Blown Fuse Indication

ASK Series, DIN rail mounted fuse holders provides circuit protection for industrial control system, fuse styles are supported: 14x51 mm (ASK 6) and 10x38 mm (ASK 4).

16 mm (0.63 in) Width, Terminal Block, 600Vac/150A

XB Series offers a complete terminal block system with accessories, marking, bridging & testing standardized across the different clamping technologies.

Blocs de jonction et Cosses

Wide variety to complete your connection with DIN rail mountable, round terminals, relays, fuse terminals, screw connections and double to triple level feed throughs.
Searching for your items
fr-CA
fr
Enregistrer la configuration