General Purpose Current I/P or Voltage E/P to Pressure Converter

0 to 10 Vdc, 3 to 120 psi

3,7

(3)

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$704.49

Article# EP211-X120-10V

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-24	C$704.49
25-49	C$669.27
50-99	C$655.18
100-199	C$627.00
200+	C$612.91

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 7 semaines

Ajouter à la liste des projets

Low Cost
Built-in Volume Booster
Small Size
Field Reversible

Voir Spécs

EP211-X120-10V Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Output Range

Input Signal

Features

Connection

Pressure Port Type

Pressure Port Size

Accuracy

Specs

Modifier les options du modèles

Description

The IP211/EP211 Series transducer is an electropneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The 211 Series accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM). Model selection includes General Purpose, FM Intrinsically Safe, and CSA Intrinsically Safe.

Mounting
These transducers can be pipe, panel, or bracket mounted in any position. Positions other than verticle will require recalibration of the zero adjustment. For maximum output stability the transducers should be mounted in a vibration free location or such that vibration is isolated in the X and Z axis.

Field Reversible
All transducers are calibrated at the factory for direct acting operation but may be used in the reverse acting mode by reversing the polarity of the signal leads and recalibrating. When recalibrated for reverse acting applications, the transducers provide a minimum of their full rated output pressure (i.e.15, 27, or 30 psig) upon input signal failure.

All Models

In Stock Only

passer en revue

Rated 5 out of 5 by RAFAEL70 from GREAT FEATURES ALL RIGHT THIS IS A EXCELLENT PRODUCT I USED THIS IN SEVERAL OCCASIONS

Date published: 2015-11-24

Rated 5 out of 5 by Anonymous from Kept me going! I received may order very quickly. It was packed carefully and arrived undamaged. I will use Omega again!!!

Date published: 2023-03-13

Rated 1 out of 5 by no name from second hand product we received a second hand product, not new! scratched and many spots dispainted

Date published: 2020-06-28