Retractable pH/ORP Electrodes for Tanks and Main Lines

3,0

(1)

Retractable pH/ORP Electrodes for Tanks and Main Lines

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$665.16

Article# PHE-6821

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 7 semaines

Ajouter à la liste des projets

16 Month Shelf Life
Acrylamide Gel Standard
Can Be Installed in Any Direction
Retractable Design Allows Removal Without System Shutdown

Voir Spécs

PHE-6821 Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Measurement Type

Range

Wetted Materials

Max Temperature

Process Connection Type

Process Connection Size

Features

Specs

Modifier les options du modèles

The PHE-6820B electrode and assembly features a retractable design for insertion into tanks and main lines. The assembly, when used with a 1" full port or larger ball valve (user supplied), allows the electrode to be removed without shutting the system down. This electrode can be mounted in any location, even up through the bottom of a tank with the electrode surface facing upward. Its unique design affords mounting in any direction and is suitable for most systems’ inherent design. The flat surface design minimizes fouling and coating and eliminates electrode breakage. Turbulent flow across the electrode surface results in a scrubbing action that keeps the electrode clean. The flat surface electrode is specifically designed for difficult applications such as oily waste water, emulsions, lime slurries, and flocculants.

SPECIFICATIONS
Maximum Temperature Standard Models: 87°C (190°F) CPVC body 100°C (212°F) PVDF body
Mounting Assembly: CPVC or PVDF, FKM O-Rings; 1 MNPT Pipe thread
Available Options:
“-HF” Fluoride resistant, for additional cost
“-LC” Low conductivity, for additional cost
“-GL” Ground loop, for additional cost

All Models

In Stock

passer en revue

Rated 3 out of 5 by BD1007 from No replacement Parts Available. Probe works well. Assembly is well built. Issue is they do not sell the cable individually. If the cable goes bad which is a common pH probe issue you will have to re-purchase the entire unit.

Date published: 2017-08-28