Appelez-nous au 1-888-826-6342
PID Control Modules - Single and Dual loop PID Temperature Control
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Single- and Dual-Loop Models Available
- Temperature, Strain Gage, and Process PID Controllers
- Analog and Digital I/O Models
- Ideal for Data-Acquisition Applications
Description
Model CSPID / CSPID2 Single and Dual Loop PID Control Modules- Performs Heat (Reverse), Cool (Direct), or Heat/Cool (Reverse/Direct)
- Universal Inputs Accept B, C, E, J, K, R, N, S, and T Type Thermocouples, 100 Ω 385/392 and 120 Ω 672 Type RTDs (2- or 3-wire), 0 to 10V and 0/4 to 20mA Signals
- Hot-Swappable Replacement Reduces Downtime
- Auto Addressing Minimizes Configuration Time
- Fully Isolated Design Provides Reliable Operation
- PID Control with Reduced Overshoot
- On-Demand Auto-Tuning of PID Settings
- Discrete Outputs Available in Relay, Triac, or Solid State (NFET)
- DC Analog Output (Optional, CSPID1 Only)
- Heater Current Input (Optional) Ensures Detection of Heater Circuit Failure
- Models Available for Thermocouple or RTD Inputs
- Unused inputs can be disabled to increase overall reading rate
- Programmable slope and offset correction to remove sensor error
- Ideal for Data-Acquisition Applications
- Auto Addressing Minimizes Configuration Time
- Can be Used in Conjunction With Any CS Series Modules
- Accept up to Eight ±10V or 0/4 to 20 mA Inputs per Module
- "L" Series Modules Offer 100 Linearization Points per Input
- Unused Inputs Can be Disabled to Increase Overall Reading Rate
- Ideal for Data-Acquisition Applications
- Auto Addressing Minimizes Configuration Time
- Can be Used in Conjunction With any CS Series Modules
- 8 Input / 6 Output Digital Module
- Inputs Isolated From Outputs
- Inputs Independently Switch Selectable for Sink or Source Signals
- Inputs Independently Configurable for High or Low Active State
- Inputs Independently Switch Selectable for High or Low Frequency Signals
- Relay or NFET Output Models Available
- Can be Used in Conjunction With any CS Series Modules
- Performs Reverse, Direct, or Reverse/Direct Control
- Input Accepts 20mV, 33mV, or 200mV Strain Gage Signals
- Secondary Input for Calculation of Difference, Sum, Average, etc.
- Selectable 5 or 10V Excitation
- Three Alarm Outputs per Module
- Fully Isolated Design Provides Reliable Operation
- PID Control With Reduced Overshoot
- On Demand Auto-Tuning of PID Settings
- Discrete Outputs Available in Relay or Solid State (NFET)
- DC Analog Output Optional
Approuvé CE