text.skipToContent text.skipToNavigation

Step and Direction Stepper Drives with 3 input/1 output

Step and Direction Stepper Drives

C$197.05

Article# STR2

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-9 C$197.05
10-24 C$187.20
25-49 C$183.26
50-99 C$175.37
100-199 C$171.43
200+ C$167.49

En stock

Délai de livraison (si pas en stock): 2 semaines
Step and Direction Stepper Drives STR2 STR2
  • Sophisticated Current Control
    •STR2: 2 A/phase
    •STR4: 4 A/phase
    •STR8: 8 A/phase
  • Anti-Resonance for Optimized Torque and Smoothness Over a Wide Speed Range
  • Microstep Emulation for Creating Smooth Motion Even with Low-Resolution Step Signals
  • Up to 20,000 Steps/Revolution
  • Step and Direction or CW/CCW Pulse Operation
  • Built-In Noise Filter on STEP and DIR Inputs
  • Large Family of Compatible 2-Phase Stepper Motors

STR2 Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Supply Voltage
Driver Current
Control Mode
Integral I/O
Features


The STR series stepper drive is a compact, powerful, digital step and direction drive available in three power ranges: 2 A/phase, 4 A/phase and 8 A/phase. The STR series is ideal for applications requiring basic step and direction control of a 2-phase step motor. STR drives feature advanced microstepping performance and sophisticated current control with anti-resonance. Anti-resonance electronically damps motor and system resonances, which improves motor smoothness and torque over a wide speed range.

All setup is done via dip switches and a rotary switch on the side of the drive, including motor selection, running current, idle current, and step resolution.

STR drives are available with a large family of compatible 2-phase step motors, selected to optimize performance of both the drive and motor.

NOTE: These drives require step pulses from a PLC or other controller.

SPECIFICATIONS
POWER AMPLIFIER SECTION (STR2)
Amplifier Type:
MOSFET, dual H-bridge, 4 quadrant
Current Control: 4 state PWM at 20 kHz
Output Current: Up to 2.2 A/phase, depending on motor selection
Switch Selectable % of Maximum Current: 100%, 90%, 80%, 70%
Power Supply: External 12 to 48 Vdc power supply required
Idle Current Reduction: Reduction to 50% or 90%, switch selectable

POWER AMPLIFIER SECTION (STR4)
Amplifier Type:
MOSFET, dual H-bridge, 4 quadrant
Current Control: 4 state PWM at 20 kHz
Output Current: Up to 4.5 A/phase, depending on motor selection
Switch Selectable % of Maximum Current: 100%, 90%, 80%, 70%
Power Supply: External 24 to 48 Vdc power supply required
Idle Current Reduction: Reduction to 50% or 90%, switch selectable

POWER AMPLIFIER SECTION (STR8)
Amplifier Type:
MOSFET, dual H-bridge, 4 quadrant
Current Control: 4 state Pwm at 20 kHz
Output Current: Up to 8 A/phase, depending on motor selection Switch
Selectable % of Maximum Current: 100%, 90%, 80%, 70%
Power Supply: External 24 to 75 Vdc power supply required
Idle Current Reduction: Reduction to 50% or 90%, switch selectable

CONTROLLER SECTION
Mode Of Operation:
Step and direction, Cw/Ccw
Microstep Resolution: Switch selectable: 200, 200 smooth, 400, 400 smooth, 2000, 5000, 12800, 20000 steps/revolution
Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 50 rps
Anti Resonance: Raises the system damping ratio; eliminates midrange instability and allows stable operation to 50 rps
Waveform: Allows for fine adjustment of phase current waveform harmonic content to reduce low-speed torque ripple in the range 0.25 to 1.5 rps
Digital Noise Filter: Step pulse input: 150 kHz or 2 MHz, jumper selectable
Self Test Switch Selectable: Rotates motor 2 revolutions in each direction
Control Inputs: Step, direction, enable, optically isolated; 4 to 30 Vdc, 5 to 15 mA.
Step Input: Min pulse width = 250 ns; max pulse frequency = 2 MHz
Fault Output: Photodarlington, 80 mA, 30 Vdc max; voltage drop = 1.2 Vdc max at 80 mA
Ambient Temperature: 0 to 50°C (32 to 122°F) humidity 90% non-condensing
loading all models
loading all reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getReviews, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
loading all QA
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
2-phase Biploar Step Motors
C$214.96
0 In Stock
2-phase Biploar Step Motors
C$97.22
0 In Stock
2-phase Biploar Step Motors
C$145.81
0 In Stock
2-phase Biploar Step Motors
C$114.96
0 In Stock
2-phase Biploar Step Motors
C$235.51
1 In Stock
2-phase Biploar Step Motors
C$142.05
0 In Stock
2-phase Biploar Step Motors
C$160.75
0 In Stock
2-phase Biploar Step Motors
C$700.89
0 In Stock
2-phase Biploar Step Motors
C$285.98
0 In Stock
2-phase Biploar Step Motors
C$542.03
2 In Stock
2-phase Biploar Step Motors
C$213.09
0 In Stock
2-phase Biploar Step Motors
C$293.45
1 In Stock
2-phase Biploar Step Motors
C$943.87
2 In Stock
2-phase Biploar Step Motors
C$407.47
3 In Stock
Accessories
Regeneration clamp, 24 to 80 Vdc
C$310.89
2 In Stock
fr-CA
fr
Enregistrer la configuration