Appelez-nous au 1-888-826-6342
C�bles de rallonge pour RTD avec fils r�tractables ou droits
Universal Relay Module
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$3.78 |
| 10-24 | C$3.59 |
| 25-49 | C$3.52 |
| 50-99 | C$3.36 |
| 100-199 | C$3.29 |
| 200+ | C$3.21 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Low-Level Input Signals—5 to 24 Vdc
- Logic Level Inputs (TTL, CMOS, etc.)
- Direct- or Reverse- Acting Input
- Contact Closure Input
RELAY-URM-400-CONNECTOR 2.75" Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Current Rating
Control Voltage Type
Control Voltage Range
Output Voltage Type
Output Voltage Range
Status Indicator
Input/Output Isolation
Other Features
The versatile RELAY-URM Series relay module can switch up to eight 15 A loads using low-level input signals from PLCs, process controllers, and indicators. Its flexible inputs will accept a wide variety of control signals. Selectable input allows activation of output relays on a direct-acting or reverseacting signal. Similarly, input signals can range from 5 to 24 Vdc. Conditioning of input allows open-collector or logic level inputs (e.g., TTL, CMOS) from PLCs or controllers to be used for switching output relays. In addition to working with control/logic level signals, the RELAY-URM can activate output relays on contact closure.
Many process-control instruments have low-power relays that provide contact closure for low-amperage switching but are not suitable for handling heavy loads. Simply connect the low-power relay contact output to the RELAY-URM unit and instantly get up to eight 15 A load switching relays.
Input and output connections are made through Euro-style pluggable connectors, conveniently located on the top and bottom of the unit. Screw-in terminals allow for quick connect/disconnect of wires.
The unit is housed in a versatile enclosure that can be mounted on a DIN rail or a wall. If desired, the same enclosure can be panel mounted, with relay and AC and DC supply status visible on the front. LEDs on the front panel turn on when a relay is energized.
Both 4- and 8-relay module units come with a built-in universal power supply that operates on 100 to 240 Vac. This supply provides power to the internal electronics and relays and puts out up to 20 W (5 Vdc), available for external applications.
SPECIFICATIONS
Relay Specifications:
Type: Electro-mechanical relay, SPDT
Current Rating: 15 A
Switched Voltage: Up to 250 Vac
Coil Voltage: 5 Vdc
Operating Time (Typical): 10 ms
Release Time: 5 ms
Mechanical Life Expectancy: 10 million operations
Temperature Rise: 25°C (45°F) at nominal coil voltage
Output Connections:
Type: Euro-style pluggable connectors
Terminals: Screw-type
Terminal Spacing: 5 mm (0.196')
Stripped length: 6 mm (0.236')
Current Rating: 15 A
Wire Size: 22-14 AWG
Input Connections:
Type: Euro-style pluggable connectors
Terminals: Screw-type
Terminal Spacing: 3.51 mm (0.137')
Stripped Length: 7 mm (0.275')
Current Rating: 8 A
Wire Size: 28-16 AWG
Power Supply:
Universal Input: 100 to 240 Vac
Power: 25 W
Overvoltage Protection: 115 to 135% of output
Leakage Current: Less than 0.5 mA
Efficiency: 75 to 78% typical
Output Termination: Euro-style screw terminal; dual supply output available (consult Engineering)
Dimensions:
Case: 114 L x 69 W x 140 mm D (4.5 x 2.7 x 5.5')
Bezel size: 76 W x 146 H x 1.5 mm D (3.0 x 5.75 x 0.06')
Weight: 0.9 kg (2 lb)
Many process-control instruments have low-power relays that provide contact closure for low-amperage switching but are not suitable for handling heavy loads. Simply connect the low-power relay contact output to the RELAY-URM unit and instantly get up to eight 15 A load switching relays.
Input and output connections are made through Euro-style pluggable connectors, conveniently located on the top and bottom of the unit. Screw-in terminals allow for quick connect/disconnect of wires.
The unit is housed in a versatile enclosure that can be mounted on a DIN rail or a wall. If desired, the same enclosure can be panel mounted, with relay and AC and DC supply status visible on the front. LEDs on the front panel turn on when a relay is energized.
Both 4- and 8-relay module units come with a built-in universal power supply that operates on 100 to 240 Vac. This supply provides power to the internal electronics and relays and puts out up to 20 W (5 Vdc), available for external applications.
SPECIFICATIONS
Relay Specifications:
Type: Electro-mechanical relay, SPDT
Current Rating: 15 A
Switched Voltage: Up to 250 Vac
Coil Voltage: 5 Vdc
Operating Time (Typical): 10 ms
Release Time: 5 ms
Mechanical Life Expectancy: 10 million operations
Temperature Rise: 25°C (45°F) at nominal coil voltage
Output Connections:
Type: Euro-style pluggable connectors
Terminals: Screw-type
Terminal Spacing: 5 mm (0.196')
Stripped length: 6 mm (0.236')
Current Rating: 15 A
Wire Size: 22-14 AWG
Input Connections:
Type: Euro-style pluggable connectors
Terminals: Screw-type
Terminal Spacing: 3.51 mm (0.137')
Stripped Length: 7 mm (0.275')
Current Rating: 8 A
Wire Size: 28-16 AWG
Power Supply:
Universal Input: 100 to 240 Vac
Power: 25 W
Overvoltage Protection: 115 to 135% of output
Leakage Current: Less than 0.5 mA
Efficiency: 75 to 78% typical
Output Termination: Euro-style screw terminal; dual supply output available (consult Engineering)
Dimensions:
Case: 114 L x 69 W x 140 mm D (4.5 x 2.7 x 5.5')
Bezel size: 76 W x 146 H x 1.5 mm D (3.0 x 5.75 x 0.06')
Weight: 0.9 kg (2 lb)
I was going to order 10, but I don't think this is the right page: https://www.omega.ca/en/control-monitoring/relays/solid-state-relays/p/RELAY-URM Is this for the connector only of for the Universal Relay Module? I want the module.
Hi Aleks,
Apologies for confusion. Part# for the 4 relay version is RELAY-URM-400. 8 relay version RELAY-URM-800.
Best regards,
OMEGA
Date published: 2021-10-19