Appelez-nous au 1-888-826-6342
Module d'acquisition de données thermocouple USB à 8 chaines {WINXP}{VISTA}
8-Channel USB Thermocouple Data Acquisition Module
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$812.87 |
5-9 | C$772.23 |
10-24 | C$755.97 |
25-49 | C$723.45 |
50-99 | C$707.20 |
100+ | C$690.94 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Mesure et enregistre jusqu'à 8 thermocouples sur un PC
- Logiciel Windows compris pour affichage en temps réel et enregistrement des données
- Plage de température large de -270 à 1820°C
- Accepte thermocouples types J, K, T, E, R, S, B et N
- Jusqu'à 10 lectures par seconde
- Compensation de soudure froide automatique
- Haute précision et résolution
- Interface USB - aucune alimentation requise
- Unités multiples peuvent être utilisées avec un seul PC
TC-08 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Analog Input Type
Analog Input Class
Number of Analog Inputs
Maximum Sample Rate (per sec)
Analog Input Resolution
Input Range
Power
Interface Protocol
Description
Le module d'acquisition de données thermocouple TC-08 a été conçu pour mesurer une large gamme de températures en utilisant n'importe quel thermocouple possédant un terminal de connexion thermocouple miniature. De plus, le TC-08 peut mesurer les autres capteurs en utilisant une gamme de ±70 mV. Le TC-08 possède une compensation de soudure froide, et une plage de mesure de -270 à 1820°C (la plage de température actuelle dépend du thermocouple utilisé).Le TC-08 peut être utilisé avec des thermocouples types J, K, T, E, R, S, B et N et les sorties peuvent être visualisées en degrées F, C ou mV. L'unité est précise à 0,2 pourcent ± 0,5 degrés C et possède une résolution de plus de 0,1 degrés C pour la plupart des types de thermocouples.
Le TC-08 se connecte à un port USB d'un PC Windows et permet l'ordinateur hôte de détecter automatiquement le TC-08 sans procédures de réglage compliquées. La connexion USB permet également le TC-08 à être alimenté directement par le bus USB, ce qui élimine le besoin d'une alimentation externe et rend le TC-08 idéal pour la mesure des températures à la fois dans le laboratoire et à l'extérieur.
La connectivité USB du TC-08 permet l'utilisation de jusqu'à 20 modules d'acquisition de données sur un seul PC, ce qui rend le TC-08 idéal pour être utilisé en tant que système multicanaux d'acquisition de température, avec le coût par chaine beaucoup plus bas que ceux des autres systèmes de cette taille. Le temps de conversion bas du TC-08 permet la mesure de jusqu'à 10 thermocouples chaque seconde, et la haute résolution (20 bits) permet le TC-08 de détecter des changements minuscules de température. Avec la module d'acquisition de données thermocouple TC-08 vos mesures peuvent être effectuées rapidement et avec précision. Vous devez simplement connecter votre TC-08 à un port USB sur votre ordinateur, connecter vos thermocouples, et vous y serez prêts à mesurer les températures.
Logiciel d'enregistrement
Avec le logiciel Enregistreur TC-08 compris, vous pouvez configurer de multiples TC-08 (USB), régler l'intervalle d'échantillon de 0,1 secondes à plusieurs heures, et régler le nombre maximum de lectures. Vous pouvez également régler ce que vous voulez faire lorsque les lectures de thermocouples seront prises - soit: Arrêt; Répéter immédiatement (recommencer); Défilement (les enregistrements les plus anciens disparaissent); ou Répéter après pause (la pause est réglée par l'utilisateur). Les données peuvent être visualisées à la fois pendant et après la collection dans un tableau ou format graphique.
Pilotes de logiciel
Pour les utilisateurs qui souhaitent écrire leur propre logiciel, une gamme de pilotes et d'exemples de programmation sont compris:
Pilotes pour Windows 98SE/ME/2000/XP. Exemples de programmation pour C, Delphi, Visual Basic, Labview, Agilent VEE 6.1 et Microsoft Excel.
Caractéristiques
Nombre de chaines: 8
Temps de conversion: 100 ms (thermocouple
et compensation de soudure froide)
Précision de température: Somme de
±0,2% de la lecture et ±0,5°C
Précision de tension: Somme de ±0,2%
de la lecture et ±10 µV
Protection contre les surcharges: ±30 V
Tension de mode commun maximum: ±7,5 V
Impédance d'entrée: 2 M.
Gamme d'entrée (tension): ±70 mV
Résolution: 20 bits
Résolution sans bruit: 16.25-bits
Types de thermocouple: B, E, J, K, N, R, S, T
Connecteur d'entrée: thermocouple miniature
Connecteur de sortie: câble USB fourni 1,8 m
Connexion PC: USB 1.1
Alimentation: port USB
Dimensions:
201 x 104 x 34 mm
Logiciel compri: TC-08 Enregistreur et lecteur
EXIGENCES PC
Processeur: microprocesseur Pentium ou équivalent
Mémoire: 32 MB minimum
Espace disque: 10 MB minimum
Système d'exploitation: édition 32 bits de Microsoft Windows XP (SP2) ou VISTA
Ports: USUSB 1.1 ou USB 2.0 port compliant.
Doit être connecté directement au port ou alimenté par un hub USB
Rated 5 out of
5
by
MJService from
Great product!
We installed the TC-8 on our powder coating oven with 8 thermocouples so we can do temperature profiles. Easy to set up and use!
Date published: 2015-11-24
Rated 3 out of
5
by
labtech1 from
Device great! Software - not as much.
Bought 3 of these last month and work well so far. Using simplest portion of software (no programing, just spreadsheet readouts). Unfortunately, software does not permit spreadsheet readout of all 24 thermocouples at once (3 devices x 8 TCs). Appears to be limited to 16 TCs max. at one time. There is a work around, but is cumbersome.
Also unfortunate that could not get calibration certificate when purchased devices, as will need for any certified lab testing.
Date published: 2017-04-10
Rated 4 out of
5
by
JustinS from
Does the job
Have two in place for testing. The software is a bit iffy but they make it easy to access with other programs. Calibration certificates for the probes need to be requested separately. Overall very pleased and would buy from Omega for any other testing needs.
Date published: 2018-04-17
Rated 5 out of
5
by
Ariel cao from
Extension of calibration system
Worked flawlessly within our calibration system. OMEGA shipped the unit quickly and all in perfect conditions. Their ordering system helped very effectively to add the right thermocouples..
Date published: 2023-09-30
Rated 5 out of
5
by
Anonymous from
Great product!
Very useful for different types of thermocouples.The software is very user friendly.
Date published: 2022-11-16
Rated 5 out of
5
by
Yitz07666 from
Does what it is supposed to do.
Does what it is supposed to do. I would like it better if the labels exported to CSV. Using two of these together with 9 K-type TCs. Pretty easy to use.
Date published: 2021-04-29
Rated 4 out of
5
by
Chloe from
Great product but the software could be improved
This data logger is really easy to use and makes it simple to track 8 temperatures at once. The USB power is the reason I chose this product and it is reasonably priced compared to similar data loggers. My only issue is with the software, which is intuitive but old and sometimes fails and then is hard to restart.
Date published: 2020-07-27
Rated 5 out of
5
by
Tylor from
Great.
Our customer had to test our model with it and they were satisfied
Date published: 2018-09-05
- RoHS 2015/863 - Voir le certificat
- Approuvé CE
I have to do a test of 24 hr... How long can I take continuous measurements? Does it have a limit of readings or any capacity restrictions?
Thank you for your question. Limitation is based upon PC memory since you are logging to PC.
Date published: 2021-07-15
Can I use with a YSI 400 series thermistor?
Thank you for your question. The TC-08 does not accept thermistors just Thermocouples.
Date published: 2022-01-05
Is it compatible with Windows 10? Saw this in the manual "the unit can be used with any laptop or PC running Windows XP SP2 or Vista".
Yes the latest version of software is Windows 10 compliant
Date published: 2020-02-24
Looking for a LabVIEW library for this. Can someone provide a link?
Please see link to our ftp site for Labview driver:
ftp://ftp.omega.com/public/DASGroup/products/TC-08/
Date published: 2020-06-03
We are thinking about deploying the 8-Channel USB Thermocouple Data Acquisition Module into a LabVIEW application for multiple systems due to supply chain issues, but the usbtc08.dll that you have is compiled for 32 bit, and we have to use 64 bit LabVIEW
Thank you for your question.. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2023-08-04
I need 9 simultaneous thermocouple measurements for the TUSs I perform. If I buy 2 TC-08,s and connect them both to the same computer, will the software be able to recognize, track, and save the temperature data from the thermocouples on both devices?
Hi there, yes, you can use multiple TC-08's with one software instance, the instructions are in the manual at this link: https://assets.omega.com/manuals/M4526.pdf. Thank you!
Date published: 2019-05-20
Do you provide some kind of API for software integration?
We do not supply an API but we do provide examples with other higher level languages such as C++, VB and others. Please download manual for details.
Date published: 2020-06-09
Does the logger output in standard RS232 format? When the USB plugs in, does it register as a com port, or something proprietary? I have RS232 datalogging software that I'd like to use, rather than the Omega software. The RDXL-SD-Series does this.
Here is a link to the Programming Examples Docuymentation for the TC-08 this is the only support we offer for custom programming for this unit: ftp://ftp.omega.com/public/DASGroup/products/TC-08/ProgrammingExamples.zip
Date published: 2020-04-14
Has the location for the TC-08 software changed? I can't find it on the previously specified web address.
We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2021-05-28
Can the client software be used on windows 11 enterprise?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@dwyeromega.com
Date published: 2024-01-12